v2.04 beta :: 22/12 :: test version Download: https://mega.nz/#!ulYlTB4D!nEymzPvujO17EXa95q9_oRHAQOxZUZvxu_bulZ8_wUA Changes 22/12: - reboots the D3 on high temperatures (> 85 deg PCB temp). This feature will save your unit in case your fans will fail. - improved auto tune algorithm stability - Increased the chip starting frequency of the autotune algorithm for higher voltages. Changes 14/12: - fixed auto recover from xxxx - cleaned up kernel logging - a bit more aggressive tuning - tunes down faster now when too many HW errors are detected Changes 13/12: - Totally rewritten code base, based from latest available bitmain / cgminer sources - ASIC's now automatically recovers from xxxxx errors without restarting (The auto reboot options are still in there in case it doesn't succeed) - blazing fast mining status overview in the webinterface Cheesy

- as requested: the dev mining starts later now (after 5 minutes) - as requested: dev pools status is now visible in the miner status Important: The autotune feature is not completely finished and the startup is a bit slow now.. Therefore I need your help. So what do you need to do: set your advanced settings the same as displayed bellow let it run for at least 20 minutes PM your (complete) kernel log By doing so I can get to a conclusion what the starting frequency of the auto tune algorithm should be. In case you want to help more: increase the voltage a bit and do the steps above again as it will give some more information Thank you! https://img15.hostingpics.net/pics/453940Untitled.jpg