Quote from: smoolae on December 29, 2017, 05:50:41 PM

Quote from: ChipsSlave on December 29, 2017, 05:34:20 PM

Mobo: ASRock H81 PRO BTC R2.0 S1150 Intel H81
GPU's: 6x Sapphire RX570 Nitro+ 8GB

I never had any problems booting the system before as I was setting the rig up whilst the screen was always plugged in and now when everything is set up I must plug the monitor in to boot the system. Never ever had this kind of problem with any other computer systems.

What happens if you boot up the system with a monitor installed and later, when mining has started, you just take out the monitors power cord from the outlet?
I use my rig that way and if I need to do something with it I use Team Viewer from my phone or laptop.

System does not crash or anything it carries on mining, but the problem is that if I need to restart the system remotely whilst I'm connected through TeamViewer system does not load up without a monitor plugged in.

Quote from: hagbase on December 29, 2017, 05:51:45 PM

Quote from: ChipsSlave on December 29, 2017, 05:34:20 PM

Mobo: ASRock H81 PRO BTC R2.0 S1150 Intel H81
GPU's: 6x Sapphire RX570 Nitro+ 8GB

I never had any problems booting the system before as I was setting the rig up whilst the screen was always plugged in and now when everything is set up I must plug the monitor in to boot the system. Never ever had this kind of problem with any other computer systems.

Mainboard Bios -> advanced settings -> disable render stand by.

Will try this out once I get back home from work. Thank you.