Quote from: NicNacCoin on January 03, 2018, 03:58:42 AM

Quote from: ssdnow on January 03, 2018, 03:27:07 AM

Quote from: ssdnow on January 03, 2018, 02:24:31 AM

Quote from: NicNacCoin on January 03, 2018, 01:19:30 AM

Quote from: ssdnow on January 03, 2018, 12:54:58 AM

Hi- @NicNacCoin.
Could you help me in telling me if my node is running well? if what that shows is the right thing, because when entering the wallet that creates with the same .conf that the nodes have, it tells me that there is an error in synchronizing.

Quote from: ssdnow on January 02, 2018, 07:39:02 PM

Is this node running well? or is it not working as it should be?

Code:

fork@tech2:~/forknote-linux$ ./forknoted --config-file configs/technetium.conf
Success: Configuration file openned: "configs/technetium.conf"
2018-Jan-02 19:36:18.743872 INFO forknote v2.1.1.1245 ()
2018-Jan-02 19:36:18.744925 INFO Module folder: ./forknoted
2018-Jan-02 19:36:18.746964 INFO Opening DB in /home/fork/.technetium/DB
2018-Jan-02 19:36:18.763394 INFO DB opened in /home/fork/.technetium/DB
2018-Jan-02 19:36:18.766321 INFO Initializing core...
2018-Jan-02 19:36:18.777807 INFO Core initialized OK
2018-Jan-02 19:36:18.778304 INFO Initializing p2p server...
2018-Jan-02 19:36:18.778495 INFO Generated new peer ID: 7029398983946693145
2018-Jan-02 19:36:18.778632 INFO Binding on 0.0.0.0:34250
2018-Jan-02 19:36:18.778833 INFO Net service binded on 0.0.0.0:34250
2018-Jan-02 19:36:18.778966 INFO Attempting to add IGD port mapping.
2018-Jan-02 19:36:22.784096 INFO No IGD was found.
2018-Jan-02 19:36:22.784263 INFO P2p server initialized OK
2018-Jan-02 19:36:22.792004 INFO Starting core rpc server on address 127.0.0.1:34377
2018-Jan-02 19:36:22.792378 INFO Core rpc server started ok
2018-Jan-02 19:36:22.792522 INFO Starting p2p net loop...
2018-Jan-02 19:36:22.792608 INFO Starting node_server
2018-Jan-02 19:36:22.799842 INFO
2018-Jan-02 19:36:22.799842 INFO **********************************************************************
2018-Jan-02 19:36:22.799842 INFO You are now synchronized with the network. You may now start simplewallet.
2018-Jan-02 19:36:22.799842 INFO
2018-Jan-02 19:36:22.799842 INFO Please note, that the blockchain will be saved only after you quit the daemon with "exit" command or if you use "save" command.
2018-Jan-02 19:36:22.799842 INFO Otherwise, you will possibly need to synchronize the blockchain again.
2018-Jan-02 19:36:22.799842 INFO
2018-Jan-02 19:36:22.799842 INFO Use "help" command to see the list of available commands.
2018-Jan-02 19:36:22.799842 INFO **********************************************************************
2018-Jan-02 19:36:22.802332 WARNING [207.246.65.66:[b]57677[/b] INC] Exception in connectionHandler: TcpConnection::read
2018-Jan-02 19:36:24.809138 WARNING [207.246.65.66:[b]46316[/b] INC] Exception in connectionHandler: TcpConnection::read
2018-Jan-02 19:36:26.811479 WARNING [207.246.65.66:[b]33803[/b] INC] Exception in connectionHandler: TcpConnection::read
2018-Jan-02 19:36:28.814101 WARNING [207.246.65.66:[b]46890[/b] INC] Exception in connectionHandler: TcpConnection::read
2018-Jan-02 19:36:30.817393 WARNING [207.246.65.66:[b]35115[/b] INC] Exception in connectionHandler: TcpConnection::read
2018-Jan-02 19:36:32.819522 WARNING [207.246.65.66:[b]38274[/b] INC] Exception in connectionHandler: TcpConnection::read
2018-Jan-02 19:36:34.823345 WARNING [207.246.65.66:[b]38731[/b] INC] Exception in connectionHandler: TcpConnection::read
2018-Jan-02 19:36:36.825551 WARNING [207.246.65.66:[b]54882[/b] INC] Exception in connectionHandler: TcpConnection::read
2018-Jan-02 19:36:38.828191 WARNING [207.246.65.66:[b]54645[/b] INC] Exception in connectionHandler: TcpConnection::read
2018-Jan-02 19:36:40.832488 WARNING [207.246.65.66:[b]51703[/b] INC] Exception in connectionHandler: TcpConnection::read
2018-Jan-02 19:36:42.834446 WARNING [207.246.65.66:[b]44667[/b] INC] Exception in connectionHandler: TcpConnection::read

Looks like your coins config file has p2p-bind-port=34250
this is just your daemon attempt to connect to 207.246.65.66:(all those other ports) its fine I get that when testing
More interested in what error Simplewallet gives(if any)?
FYI, you should have at minimun 2 nodes.
Once those nodes are up and you get the message "You are now sync.." try connecting with a desktop or laptop.
Are you able to connect to this network using 3rd machine in its current state?

Most error can be fixed by deleting stored blockchain on server.
I tried the simplewallet "reset" but that works like 1 out of 1,000 times.

I've notice after v2.0.6 creating Pre-mine coins and getting block reward mismatch or genesis tx coinbase blah blah blah require workaround.
then if you test min a few blocks with ZAWY params and let your network go unmined for a period of time and mining resumes the difficulty will adjust to diff 1 and then there's the forknoted "height overhead diff" error that requires another fix.

Good luck. reach me by email at support@nicnaccoins.com

Here I am going to leave a video of how I did everything from 0

https://www.youtube.com/watch?v=5sunNBSJVpQ&feature=youtu.be

file .conf

Code:

EMISSION_SPEED_FACTOR=18
DIFFICULTY_TARGET=120
CRYPTONOTE_DISPLAY_DECIMAL_POINT=12
MONEY_SUPPLY=18446744073709551615
GENESIS_BLOCK_REWARD=0
DEFAULT_DUST_THRESHOLD=1000000
MINIMUM_FEE=1000000
CRYPTONOTE_MINED_MONEY_UNLOCK_WINDOW=10
CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE=100000
MAX_TRANSACTION_SIZE_LIMIT=100000
CRYPTONOTE_PUBLIC_ADDRESS_BASE58_PREFIX=287
DIFFICULTY_CUT_V1=60
DIFFICULTY_CUT_V2=60
DIFFICULTY_CUT=0
DIFFICULTY_LAG_V1=15
DIFFICULTY_LAG_V2=15
DIFFICULTY_LAG=0
DIFFICULTY_WINDOW_V1=720
DIFFICULTY_WINDOW_V2=720
DIFFICULTY_WINDOW=17
ZAWY_DIFFICULTY_V3=1
ZAWY_DIFFICULTY_DIFFICULTY_BLOCK_VERSION=3
p2p-bind-port=22850
rpc-bind-port=22851
BYTECOIN_NETWORK=a0a5ac32-4450-4c62-c743-c63d3fe13ba5
CRYPTONOTE_NAME=technetium
GENESIS_COINBASE_TX_HEX=010a01ff0001ffffffffffff0f029b2e4c0281c0b02e7c53291a94d1d0cbff8883f8024f5142ee494ffbbd0880712101fff35ac4f45553edcadf0be748fb3dee99d5978f835e21c6949fab34ade1982b
MAX_BLOCK_SIZE_INITIAL=100000
UPGRADE_HEIGHT_V2=1
UPGRADE_HEIGHT_V3=30
seed-node=207.246.65.248:22850
seed-node=207.246.112.171:22850

The servers will be active if you want to test, then I will remove it for security reasons.

I did it step by step as you explained to me and I still have the same error message in simplewallet

Code:

C:\fork\forknote>simplewallet.exe --config-file configs/technetium.conf
Success: Configuration file openned
2018-Jan-02 23:22:16.774509 INFO forknote wallet v2.1.2.1251 ()
Nor 'generate-new-wallet' neither 'wallet-file' argument was specified.
What do you want to do?
[O]pen existing wallet, [G]enerate new wallet file, [I]mport wallet or [E]xit.
o
Specify wallet file name (e.g., wallet.bin).
Wallet file name: GA
password: ******
2018-Jan-02 23:22:25.791290 INFO Loading wallet...
Sync from timestamp: 1514857800
2018-Jan-02 23:22:25.838320 INFO Opened wallet: TbcFDrKbVmbA4tzNHvF513FCivJXsZ91TGA7eaL36gwUHrW8YYRScdGdrYfFX4YV4DJPWEt759CojLUMACWPMFWe1rpS1KuUW
2018-Jan-02 23:22:25.842823 INFO **********************************************************************
Use "help" command to see the list of available commands.
**********************************************************************
2018-Jan-02 23:22:25.852829 ERROR [BlockchainSynchronizer] Failed to query outdated pool transaction: NodeErrorCategory:3, Network error

[wallet TbcFDr]: 2018-Jan-02 23:22:30.858810 ERROR [BlockchainSynchronizer] Failed to query outdated pool transaction: NodeErrorCategory:3, Network error
2018-Jan-02 23:22:35.870153 ERROR [BlockchainSynchronizer] Failed to query outdated pool transaction: NodeErrorCategory:3, Network error
2018-Jan-02 23:22:40.877934 ERROR [BlockchainSynchronizer] Failed to query outdated pool transaction: NodeErrorCategory:3, Network error
2018-Jan-02 23:23:10.930158 ERROR [BlockchainSynchronizer] Failed to query outdated pool transaction: NodeErrorCategory:3, Network error
2018-Jan-02 23:23:15.949587 ERROR [BlockchainSynchronizer] Failed to query outdated pool transaction: NodeErrorCategory:3, Network error

Code:

C:\Users\Crackup\Music\technetium>lib\simplewallet --config-file configs/technetiumcoin.conf
Success: Configuration file openned
2018-Jan-02 21:48:51.554000 INFO forknote wallet v2.0.1.1221 ()
Nor 'generate-new-wallet' neither 'wallet-file' argument was specified.
What do you want to do?
[O]pen existing wallet, [G]enerate new wallet file, [I]mport wallet or [E]xit.
g
Specify wallet file name (e.g., wallet.bin).
Wallet file name: GA
password: ****
Sync from timestamp: 1514864938
2018-Jan-02 21:48:58.465000 INFO Generated new wallet: Tbc9gPp3Vih3JWsX75gLr91TxqbuvdJoUe1ufFrCtGKfB1j8tYR84XpTj2pcVmwU661gFfq4EVqJuMBGSaGTmk7q3C1L
2018-Jan-02 21:48:58.465000 INFO view key: f306fea55ad26819f2588b61d9aef3998d46e911c891926c4f8170933f506e01
2018-Jan-02 21:48:58.484000 INFO **********************************************************************
Your wallet has been generated.
Use "help" command to see the list of available commands.
Always use "exit" command when closing simplewallet to save
current session's state. Otherwise, you will possibly need to synchronize
your wallet again. Your wallet key is NOT under risk anyway.
**********************************************************************

[wallet Tbc9gP]: 2018-Jan-02 21:50:34.051000 INFO Height 1, transaction a7bb9f4ad14af1e3198872f80473d6fb06b5212d01dc352c1575e234075c33dc, received
resett 1 of 1
Sync from timestamp: 1514864938
2018-Jan-02 21:54:11.727000 INFO Reset completed successfully.
2018-Jan-02 21:54:12.457000 INFO Height 1, transaction a7bb9f4ad14af1e3198872f80473d6fb06b5212d01dc352c1575e234075c33dc, received 70.368475742208

Those were simply trouble shooting step, no grntee
You want to try those 1st in this case I simple made new seeds for the configs on ubuntu 14.04 64 bit

Feel free to test yourself using config file param
EMISSION_SPEED_FACTOR=18
DIFFICULTY_TARGET=120
CRYPTONOTE_DISPLAY_DECIMAL_POINT=12
MONEY_SUPPLY=18446744073709551615
GENESIS_BLOCK_REWARD=0
DEFAULT_DUST_THRESHOLD=1000000
MINIMUM_FEE=1000000
CRYPTONOTE_MINED_MONEY_UNLOCK_WINDOW=10
CRYPTONOTE_BLOCK_GRANTED_FULL_REWARD_ZONE=100000
MAX_TRANSACTION_SIZE_LIMIT=100000
CRYPTONOTE_PUBLIC_ADDRESS_BASE58_PREFIX=287
DIFFICULTY_CUT_V1=60
DIFFICULTY_CUT_V2=60
DIFFICULTY_CUT=0
DIFFICULTY_LAG_V1=15
DIFFICULTY_LAG_V2=15
DIFFICULTY_LAG=0
DIFFICULTY_WINDOW_V1=720
DIFFICULTY_WINDOW_V2=720
DIFFICULTY_WINDOW=17
ZAWY_DIFFICULTY_V3=1
ZAWY_DIFFICULTY_DIFFICULTY_BLOCK_VERSION=3
p2p-bind-port=22850
rpc-bind-port=22851
BYTECOIN_NETWORK=a0a5ac32-4450-4c62-c743-c63d3fe13ba5
CRYPTONOTE_NAME=technetium
GENESIS_COINBASE_TX_HEX=010a01ff0001ffffffffffff0f029b2e4c0281c0b02e7c53291a94d1d0cbff8883f8024f5142ee494ffbbd0880712101fff35ac4f45553edcadf0be748fb3dee99d5978f835e21c6949fab34ade1982b
MAX_BLOCK_SIZE_INITIAL=100000
UPGRADE_HEIGHT_V2=1
UPGRADE_HEIGHT_V3=30
seed-node=159.89.46.135:22850
seed-node=159.89.176.66:22850

It works great for me, so my problem is with the nodes?
I could even mine a few and everything perfectly.
If you like, let's talk about PM.