Quote from: ukjack on January 03, 2018, 03:11:56 PM

I've got 3 miners that never start mining. I've tried reflashing the firmware and restoring defaults

The logs show it appearing to just loop round

Code:

...
Jan 3 15:09:26 (none) local0.err innominer_T2: chain:5 the plat is not inserted
Jan 3 15:09:32 (none) local0.err innominer_T2: Plug Status[6] = 1
Jan 3 15:09:32 (none) local0.err innominer_T2: chain:6 the plat is not inserted
Jan 3 15:09:38 (none) local0.err innominer_T2: Plug Status[7] = 1
Jan 3 15:09:38 (none) local0.err innominer_T2: chain:7 the plat is not inserted
Jan 3 15:09:38 (none) local0.info innominer_T2: pre 0: A1 init chain
Jan 3 15:09:39 (none) local0.warn innominer_T2: 0: detected 72 chips
Jan 3 15:09:39 (none) local0.warn innominer_T2: collect core success
Jan 3 15:09:39 (none) local0.warn innominer_T2: 0: no A1 chip-chain detected
Jan 3 15:09:39 (none) local0.warn innominer_T2: spidev0.0: 0: Found 72 A1 chips
Jan 3 15:09:39 (none) local0.warn innominer_T2: Detected the 0 A1 chain with 72 chips
Jan 3 15:09:39 (none) local0.info innominer_T2: pre 1: A1 init chain
Jan 3 15:09:39 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 3 15:09:40 (none) local0.warn innominer_T2: cmd bist start: poll fail !
Jan 3 15:09:40 (none) local0.warn innominer_T2: bist start fail
Jan 3 15:09:40 (none) local0.err innominer_T2: init 1 A1 chain fail
Jan 3 15:09:40 (none) local0.info innominer_T2: pre 2: A1 init chain
Jan 3 15:09:41 (none) local0.warn innominer_T2: 2: detected 72 chips
Jan 3 15:09:41 (none) local0.warn innominer_T2: collect core success
Jan 3 15:09:41 (none) local0.warn innominer_T2: 2: no A1 chip-chain detected
Jan 3 15:09:41 (none) local0.warn innominer_T2: spidev2.0: 2: Found 72 A1 chips
Jan 3 15:09:41 (none) local0.warn innominer_T2: Detected the 2 A1 chain with 72 chips
Jan 3 15:09:41 (none) local0.info innominer_T2: pre 3: A1 init chain
Jan 3 15:09:42 (none) local0.warn innominer_T2: 3: detected 72 chips
Jan 3 15:09:42 (none) local0.warn innominer_T2: collect core success
Jan 3 15:09:42 (none) local0.warn innominer_T2: 3: no A1 chip-chain detected
Jan 3 15:09:42 (none) local0.warn innominer_T2: spidev3.0: 3: Found 72 A1 chips
Jan 3 15:09:42 (none) local0.warn innominer_T2: Detected the 3 A1 chain with 72 chips
Jan 3 15:09:42 (none) local0.info innominer_T2: start to configure all chain from 0 to 120
Jan 3 15:09:42 (none) local0.err innominer_T2: start to read temp
Jan 3 15:09:42 (none) local0.info innominer_T2: start to configure chain 0
Jan 3 15:09:42 (none) local0.notice innominer_T2: A1 = 120,0, Clock = 120MHz
Jan 3 15:09:42 (none) local0.err innominer_T2: start to read temp

Here is where our logs kinda start to differ.
Sure sounds like it can see the chains are plugged in, but they don't reply to commands.
Green lights on all 4 chains?
they getting power? CLEAN power? Need higher (lower #) voltage? I'm using my own power supplies and I think some are as high as Power Level 22.

You have a G19? so you CAN'T flash it right? only use the "upgrade" file or did some actually come with a TF port?

Code:

Jan 3 18:35:54 (none) local0.err innominer_T2: Plug Status[5] = 1
Jan 3 18:35:54 (none) local0.err innominer_T2: chain:5 the plat is not inserted
Jan 3 18:36:00 (none) local0.err innominer_T2: Plug Status[6] = 1
Jan 3 18:36:00 (none) local0.err innominer_T2: chain:6 the plat is not inserted
Jan 3 18:36:06 (none) local0.err innominer_T2: Plug Status[7] = 1
Jan 3 18:36:06 (none) local0.err innominer_T2: chain:7 the plat is not inserted
Jan 3 18:36:06 (none) local0.info innominer_T2: chain_id:0
Jan 3 18:36:18 (none) local0.info innominer_T2: send command [write_reg]
Jan 3 18:36:18 (none) local0.warn innominer_T2: #####Write t/v sensor Value Success!
Jan 3 18:36:18 (none) local0.info innominer_T2: chain_id:1
Jan 3 18:36:30 (none) local0.info innominer_T2: send command [write_reg]
Jan 3 18:36:30 (none) local0.warn innominer_T2: #####Write t/v sensor Value Success!
Jan 3 18:36:30 (none) local0.info innominer_T2: chain_id:2
Jan 3 18:36:41 (none) local0.info innominer_T2: send command [write_reg]
Jan 3 18:36:41 (none) local0.warn innominer_T2: #####Write t/v sensor Value Success!
Jan 3 18:36:41 (none) local0.info innominer_T2: chain_id:3
Jan 3 18:36:53 (none) local0.info innominer_T2: send command [write_reg]
Jan 3 18:36:53 (none) local0.warn innominer_T2: #####Write t/v sensor Value Success!
Jan 3 18:36:53 (none) local0.info innominer_T2: chain_id:4
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd write reg: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: set default PLL fail
Jan 3 18:36:53 (none) local0.info innominer_T2: send command [write_reg]
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd write reg: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: #####Write t/v sensor Value Failed!
Jan 3 18:36:53 (none) local0.warn innominer_T2: #####Write t/v sensor Value Success!
Jan 3 18:36:53 (none) local0.info innominer_T2: chain_id:5
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd write reg: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: set default PLL fail
Jan 3 18:36:53 (none) local0.info innominer_T2: send command [write_reg]
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd write reg: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: #####Write t/v sensor Value Failed!
Jan 3 18:36:53 (none) local0.warn innominer_T2: #####Write t/v sensor Value Success!
Jan 3 18:36:53 (none) local0.info innominer_T2: chain_id:6
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd write reg: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: set default PLL fail
Jan 3 18:36:53 (none) local0.info innominer_T2: send command [write_reg]
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd write reg: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: #####Write t/v sensor Value Failed!
Jan 3 18:36:53 (none) local0.warn innominer_T2: #####Write t/v sensor Value Success!
Jan 3 18:36:53 (none) local0.info innominer_T2: chain_id:7
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd reset: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd write reg: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: set default PLL fail
Jan 3 18:36:53 (none) local0.info innominer_T2: send command [write_reg]
Jan 3 18:36:53 (none) local0.warn innominer_T2: cmd write reg: poll fail !
Jan 3 18:36:53 (none) local0.warn innominer_T2: #####Write t/v sensor Value Failed!
Jan 3 18:36:53 (none) local0.warn innominer_T2: #####Write t/v sensor Value Success!
Jan 3 18:36:55 (none) local0.warn innominer_T2: 0: detected 72 chips
Jan 3 18:36:55 (none) local0.warn innominer_T2: collect core success
Jan 3 18:36:55 (none) local0.warn innominer_T2: 0: no A1 chip-chain detected
Jan 3 18:36:55 (none) local0.warn innominer_T2: spidev0.0: 0: Found 72 A1 chips
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 1 with 9 active cores
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 2 with 9 active cores
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 3 with 9 active cores
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 4 with 9 active cores
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 5 with 9 active cores
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 6 with 9 active cores
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 7 with 9 active cores
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 8 with 9 active cores
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 9 with 9 active cores
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 10 with 9 active cores
Jan 3 18:36:56 (none) local0.warn innominer_T2: 0: Found chip 11 with 9 active cores
...