Quote from: sunk818 on January 04, 2018, 08:15:13 AM

Quote from: ParaplegicRacehorse on January 04, 2018, 07:49:37 AM

Quote from: ugie1028 on January 03, 2018, 10:10:44 PM

So cgminer does see it, its just not responding. Why?

Im sure this is a defective device now. If the other one works, then this should to, or at least get detected.

Couple question: Per the first post, are you running stock cgmining or the version with drivers for these? (-vh)

If you're running with -vh, did you compile with --enable-gekko?

Only other thing to try is tweaking voltage to see if it fits upon insert because port can't handle power . draw. If you have multimeter that helps to troubleshoot but you can blind turn the pot to adjust voltage
See page 1 on how to adjust voltage

ive tried this. ive slowly rotated it a full 360 degrees. (no multimeter) no response from cgminer while running. still throws the 'device not responding.' ive placed it in the same position as the other working chip as well. nothing.