Quote from: ParaplegicRacehorse on January 04, 2018, 05:17:18 PM

Quote from: ugie1028 on January 04, 2018, 04:40:41 PM

the way I set it up was in the manual from the 2PAC PDF. had me download the VH modified cgminer, and had me download zadig. both links in PDF.

I'm not aware of such thing and would be very suspect regarding using it for a good source of up-to-date setup information and/or good links to _safe_ (not hacked by third party) software.

See this thread, page 1 for full set up information.

Quote

my batch file looks like this. per the manual.

cgminer.exe -o stratum+tcp://stratum.slushpool.com:3333 -u username -p password --gekko-2pac-freq 200

Ah. Windows. So you didn't compile it, so the --enable-gekko compiler flag doesn't apply to you.

Quote

I had both plugged into the usb 3.0 port. one works, one doesnt. ive isolated both, and only the one i have issues with doesnt respond. im getting a hub sometime in the next few days to see if that helps. but any other suggestions would be appreciated.

As suggested earlier, you may have power-supply issues. See this thread, first several pages, for troubleshooting that.

You may also have a failed stickminer. I suggest you reach out to the vendor you bought it from for support. Chances are good, however, that you bought it second-hand in which case you are likely out of luck with regard to repairs.

I got it from ebay stating they were selling it via the eyeboot site. i should be able to return it. thats what im going to do. thanks for the help. ill just stick with the one i have, order from the manufacturer directly.