Quote from: ukjack on January 04, 2018, 05:10:46 PM

Quote from: Gazdac2 on January 04, 2018, 04:56:58 PM

you can try making the drive read/write and relaunching the miner. If that works you'd have to see if it just needs that access once, or if it needs it constantly

mount / -o rw,remount
/tmp/run.sh

if it starts mining, then halfway there.

tried this, but it does the same thing unfortunately

Code:

(none) login: root
Password:
root@miner~:
mount / -o rw,remount
root@miner~:
/tmp/run.sh
killall: innominer_T2: no process killed
killall: innominer_T2: no process killed
killall: innominer_T2: no process killed
root@miner~:
root@miner~:
ps |grep inno
839 root 476:43 python3.4 /home/inno_daemon/MServer.py
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1024 -b 5
8704 root 0:00 innominer_T2 -o stratum+tcp://s1.theblocksfactory.com:9004 -u x -p x -o stratum+tcp://scrypt.eu.nicehash.com:3333#xnsub -u x -p x -o stratum+tcp://scrypt.usa.nicehash.com:3333#xnsub -u x -p x --A1Pll1 1044 --A1Pll2 1044 --A1Pll3 1044 --A1Pll4 1044 --A1Pll5 1044 --A1Pll6 1044 --A1Pll7 1044 --A1Pll8 1044 --A1Vol1 25 --A1Vol2 25 --A1Vol3 25 --A1Vol4 25 --A1Vol5 25 --A1Vol6 25 --A1Vol7 25 --A1Vol8 25 --A1Fanmode 1 --A1Fanspd 1 --api-listen --syslog

Code:

root@miner~:
ps |grep inno
839 root 480:17 python3.4 /home/inno_daemon/MServer.py
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1024 -b 5
8948 root 0:00 grep inno

Code:

root@miner~:
innominer_T2 --debug -o stratum+tcp://s1.theblocksfactory.com:9004 -u x -p x -o stratum+tcp://scrypt.eu.nicehash.com:3
333#xnsub -u x-p x -o stratum+tcp://scrypt.usa.nicehash.com:3333#xnsub -u 3x -p x --A1Pll1 1044 --A1Pll2 1044 --A1Pll3 1044 --A1Pll4 1044 --A1Pll5 1044 --A1Pll6 1044 --A1Pll7 1044 --A1Pll8 1044 --
A1Vol1 25 --A1Vol2 25 --A1Vol3 25 --A1Vol4 25 --A1Vol5 25 --A1Vol6 25 --A1Vol7 25 --A1Vol8 25 --A1Fanmode 1 --A1Fanspd 1 --api-list
en --syslog
[2018-01-04 17:06:22.949] Global quota greatest common denominator set to 1
[2018-01-04 17:06:22.949] start to set url
[2018-01-04 17:06:22.949] Global quota greatest common denominator set to 1
[2018-01-04 17:06:22.949] Pool 1 extranonce subscribing enabled.
[2018-01-04 17:06:22.949] start to set url
[2018-01-04 17:06:22.950] Global quota greatest common denominator set to 1
[2018-01-04 17:06:22.950] Pool 2 extranonce subscribing enabled.
[2018-01-04 17:06:22.950] start to set url
pwm name:/dev/pwmgen0.0.
pwm step:5.
duty max: 100.
targ freq:20000.
freq rate:20000.
fan speed thrd:100.
fan up thrd:55.
fan down thrd:35.
auto_fan true, fan_speed 1
send command [reset]
send command [bist_start]
send command [bist_collect]
set_vid_value_g19:25,chain 0.
send command [reset]
send command [bist_start]
send command [reset]
send command [bist_start]
send command [bist_collect]
set_vid_value_g19:25,chain 2.
send command [reset]
send command [bist_start]
send command [bist_collect]
set_vid_value_g19:25,chain 3.
Segmentation fault

ahh damnit...
this is a multithreaded application I bet the error is related to

Code:

[2018-01-04 17:06:22.950] start to set url

https://www.nicehash.com/help/scrypt-mining

did you try a different pool other than nicehash?
are you escaping the #?
eg 3333/#xnsub
you might even have to enter it as "///#" depending on how many levels of stupid.

"it works for us, on our own pools. so send it to the customers"- inno