Hello,
I built a very crude SRR circuitry for a Raspberry Pi to remotely reset a rig or switch it on/off (The raspberry Pi basically controls an optocoupler connected to the reset and poweron pins of the mobo).
For the moment the Raspberry Pi just detect if port 22 is open on the rig. If not, it assumes that the rig is not reachable by SSH and reset the rig.
I see that there is an SRR scrips on nvOC, that looks much more sophisticated than what I am doing. Unfortunately there is no mention of the watchdog software to run on the Raspberry Pi.
Anyone can give me a pointer to the software to run on the Raspberry Pi.
Cheers
I have some code to share with you but the site is blocking my input.
Trying to contact with an admin about.
Thanks :-) Maybe you can post a link outside this forum
Ok, have a look at this and see if can help:
https://bitcointalk.org/index.php?topic=1854250.msg22615430#msg22615430I don't use Nvoc's temp control.
Here the latest version of script (removed reset bit and add var to use/not to use telegram alerts. I did not test the telegram bit so be aware):
https://pastebin.com/mcqmt9CFIt is possible to add code to nvoc's temp control (or wdog) and reset/poweroff/on the rig from a raspberry pi.
I just look forward to have a well configured rig and make it work stable instead of using wdog.
I do not trust wdog not because of the coders/scripts but because of so many gpus and drivers (from time to time they change the output of error codes, etc).