Quote from: Souran on January 06, 2018, 12:59:22 AM

Quote from: Cereberus on January 01, 2018, 10:19:56 AM

I am the one that got the other way around and choose the Sapphire Pulse. I undervolt the cards with Hynix Memory and Bios mod them. MSI Afterburner settings are :

GPU CORE CLOCK: 1150
GPU MEMORY CLOCK: 2175

Hashrate for a card is 30.5 Mhash and I doubt the Nitro+ can go much higher than this, max I have seen is 31 Mhash. I have gonne with Sapphire Pulse because the power consumption is just a bit lower and in mining every little bit helps, running 95 watt while mining monero or 110 watt while mining ethereum only and 145 watt in dual mine.

Still the Nitro+ is considered to be the best version of the Sapphire cards.

I really hope that wattage reading is from the wall.. cuz my 580 nitro+ SE cards dual mine 30.5eth/97lbry @ 105W in gpuz

Hi all, I see you guys getting 30+ mh per card and I have having trouble getting those result, was hoping for some help to troubleshoot and get those better hashrates. In my rig I have 7 Sapphire cards, 3 nitro+ and the other 4 are the pulse brand. They are getting exactly the same hashrate and performance (to answer the OP's question) and were doing about 22mh stock on Claymore on Windows 10 with latest radeon driver. I then flashed BIOS using the latest Polaris bios editor and now cards are all sitting at 26mh. After reading around I believe they should be slightly higher. Was hoping for some knowledge on how to achieve this. Any and all help appreciated!