3 questions for Amir / Terrahash:
1) A normal PSU does not have 10 or 20 connectors with 6 pin so ... Does DX Mini case come with adapters for 20 modules even if I ordered only 10 ? If yes, I assume this adapters are available even if I ordered the case without PSU.
2) Similar question about cooling system and fans ... I assume DX Mini case will have full cooling for 20 modules regardless of number of modules ordered in the case ...
3) How many USB cables I need to use to connect a DX Mini with 10 boards to a computer ? Do I need 1 (from DX Mini to computer) or 10 (for each module) ? I hope only one ...
My concern is about a possible upgrade (buy more modules) and I wand to understand if I need anything else other than plug in the module itself. Do I need any extra cable or adapter or anything else ...
Terrahash, based on your message I assume the answer to my 3rd question is 1 USB cable to PC ... I2C jumper cable (provided by Terrahash) is used as connection between K16 boards.
The I2C connector is 4 pins. There are 4 connectors on each board. 2 on both sides of the USB connector and 2 on the edges right next to the edge with the USB connector. The 3 Pin connector is for the fan. TerraHash boards will each come with a I2C jumper cable to daisy chain the board with another one.
Please, can you please comment on my first 2 questions ?
Do you have any update on the DX Mini case ? We are still waiting to see at least some drawing / rendering if not real picture of the case.
