Quote from: lmannyr on January 10, 2018, 02:31:01 PM

Quote from: crisandi on January 10, 2018, 02:10:37 PM

Hello,
I just started using this and I have to say that I really enjoy it and I believe that I will move all my rigs on your operating system.
I have just one thing that I don't understand.
I started my 6 GTX 1080Ti and it worked on the first try, all 6 gpu's were showing and the mining speed was above windows, so I shut it down and placed it back on the shelf and now I get " No screen session found.", miner doesn't work only if i restart the rig and it only detects 5 GPU's . ( Didn't change anything, just placed it on a shelf, all risers and cables are ok, the rig is not connected to any screen, the 6th gpu starts but the miner doesn't see it)
What could be the problem?

Thank you .

If it was working before you physically moved it, then it's not an SMOS issue. Sounds to me you need to recheck your power connection. May want to remove GPU one by one then restarting in between to isolate which card is the issue. Then you can further replace riser check it's cables etc.... risers are a known problem. Bad QC.

Ok thank you, I will try and see if it works