Quote from: monkeeking on January 12, 2018, 08:53:21 AM

Quote from: carbonc on January 06, 2018, 10:13:28 PM

USCG_Vet's (aka carbonc in bitcointalk.org) bring's you:
GoaCoin MasterNode GUIDE for windows+linux [Hot+Cold]

Code:

#I want to give credit to paranoidtruth for most of this manual.
#I borrowed a lot of his work from another coin.
#GoaCoin GUIDE for windows-linux setup

#you need a linux vps to get a public IP, etc. If you don't know what that is, do something else.
#I am NOT a linux expert, if you are and see anything incorrect, unnecessary, or should be added for security, etc, please let me know and I'll update!
#focusing on the linux side, the windows *should* be pretty easy and simpler than it sounds
#But I will also cover the windows side below.

#I personally use a fairly small linux instance, 1024memory, ubuntu, 16.04
#there are tons of vps services like: ovh, vpsdime, vultr, digitalocean, etc, etc.
#get the ip & root login from your vps you setup
#SSH into the vps (most windows users will use putty. If you're not familiar with putty, watch a quick youtube vid)
#If you're on a mac (when the mac wallet is available, you have a built in SSH terminal instead of putty)
#setup putty to connect to the IP and save that connection, ssh root@your_ip
#after connecting should see something like: root@whatever_your_server_name_is
#copy all instructions one line at a time:

#if we have a cheap vps instance with low memory, a swap file for more memory is a good idea:
free -h
#that will just show what you currenty have

#now setup the swap:
sudo fallocate -l 4G /swapfile
ls -lh /swapfile
sudo chmod 600 /swapfile
sudo mkswap /swapfile
sudo swapon /swapfile
#Make Changes Permanent
echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab
sudo bash -c "echo 'vm.swappiness = 10' >> /etc/sysctl.conf"

#Confirm Changes, you should now see a second line different that before, showing the 4G swap has been setup
free -h

#I also prefer to not install as root. Security & makes it easier if later you want to run more than one coin on the server,
#you will have a diff home dir for each coin
#so let's create a user called GoaCoin1
#it's going to ask you questions like room number, you can just hit enter for all those, all you really need to fill in
#is the new user password, do not lose this password either, you need both the root & GoaCoin1 password from now on

#You can try to run this command but sometimes you will get an error message depending on the Linux install you have
adduser GoaCoin1

# This is the error message from running "adduser GoaCoin1" on some Linux configurations
# "adduser: Please enter a username matching the regular expression configured
# via the NAME_REGEX[_SYSTEM] configuration variable. Use the '--force-badname'
# option to relax this check or reconfigure NAME_REGEX."
# Since we don't want to reconfigure the NAME_REGEX file,
# let's just relax the constraint for the new username instead.
sudo adduser --force-badname GoaCoin1

#now give this user sudo access (more power!)
usermod -aG sudo GoaCoin1

#alright, if this is your first coin on the server, there are upgrades & dependencies to install:
sudo apt-get update -y
sudo apt-get upgrade -y
sudo apt-get dist-upgrade -y
sudo apt-get install nano htop git vim -y
sudo apt-get install build-essential libtool autotools-dev automake -y
sudo apt-get install pkg-config libssl-dev libevent-dev bsdmainutils software-properties-common -y
sudo apt-get install libboost-all-dev -y
sudo apt-get install libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev -y
sudo add-apt-repository ppa:bitcoin/bitcoin -y
sudo apt-get install libdb4.8-dev libdb4.8++-dev -y
sudo apt-get install fail2ban -y
sudo apt-get install -y ufw
sudo apt-get update -y

#alright, now let's install GoaCoin
#change over to our GoaCoin1 user to install in that user home dir
#it may ask for your GoaCoin1 password
su - GoaCoin1

#verify we are in the GoaCoin1 home dir:
pwd
#that will show your curr directory, which should be /home/GoaCoin1

#Now let's install GoaCoin into your new user's home folder
git clone https://github.com/goacoincore/goacoin.git

#Check to see if it created a goacoin folder
ls
#You should see the "goacoin" folder in a different color

#build it, some of these steps will take a while:
cd goacoin
chmod 755 autogen.sh
./autogen.sh
./configure
chmod 755 share/genbuild.sh
make

#built, lets move back to your home dir:
cd ~/

#now, the ls command shows your files/directories
ls
#the ls -alrt will show all your hidden files/directories as well:
ls -alrt

#you should see a lot more there, like the .goacoincore directory that you didn't see before, so you have a GoaCoin & a .goacoincore directory
#copy your goacoind executable file to /usr/local/bin so that it's globally executable from anywhere
sudo chmod +x goacoin/src/goacoind
sudo cp goacoin/src/goacoind /usr/local/bin/

#alright, let's see if we can start it:
goacoind -daemon
#now it should be running. try some commands:

# change directory to the goacoin/src/ folder
cd goacoin/src/

# List all commands for ./goacoin-cli
./goacoin-cli help

# Get mining info
./goacoin-cli getmininginfo

#you should see some info, one important one is the blocks.
#do that command again:
./goacoin-cli getmininginfo
#you should see a higher block number than before. If it is, it's syncing to the block chain, doing good!
#let it run for a while. we want it to fully sync, so keep doing that command until it reaches the curr block
#what's the current block? you can see the block # here: http://goacoin.be/

#ok, all sync'd? let's stop it because we are going to edit the conf file.
#If you edit the conf file, in particular the user/pass while it's running, you'll get stuck, so always stop it first:
./goacoin-cli stop

#probably easiest editor to use is nano, at the bottom you'll see commands,
#like CTRL-X will exit (it says where it's going to save, hit [ENTER])
nano .goacoincore/goacoin.conf

#remove whatever is there, and copy-paste exactly this into it:

rpcuser=goacoin1rpc_or_some_other_random_username_with_only_letters_and_numbers
rpcpassword=asdf1234_or_make_up_some_random_pass_with_letters_and_numbers_you_do_not_need_to_remember_it
rpcport=10024
port=1947
masternode=1
listen=1
staking=0
discover=1
maxconnections=256
externalip=YOUR_VPS_IP:1947
masternodeprivkey=xxx
addnode=54.37.74.53
addnode=207.148.66.170
addnode=194.67.220.255
addnode=45.76.190.44
addnode=80.208.227.101
addnode=185.92.223.139

#NOW replace the rpcuser, rpcpassword, and the externalip IP address.
#The IP is your vps IP:1947, so it should look like xx.xx.xx.xx:1947
#the masternodeprivkey will be from your windows setup. If you already did that, you already have it.
#But you probably don't if you haven't done the windows side yet, so just leave it as xxx for now

#to save
CTRL X

#agree to over write the file press Y
Y

#to tell Linux to make the change to the file and exit nano
ENTER

# allow port 1947 through the firewall
sudo ufw allow 1947/tcp

#linux side is almost done. (we still need the masternodeprivkey from your Windows PC wallet)
#######################################################################################################

#######################################################################################################
# WINDOWS:
#side note, you actually need a little over 1000 because there's a trans fee.
#If you literally have only 1000, go buy one more coin.

1) Download and install GAO on your home PC computer, links:

   https://github.com/goacoincore/goacoin/releases/download/v0.12.1.6/goacoin-qt-0.12.1.6-win64.zip
   https://github.com/goacoincore/goacoin/releases/download/v0.12.1.6/goacoin-qt-0.12.1.6-win32.zip
   Choose win64 OR win32 based on the operating system (I always get the 32-bit because it's usually less buggy)

2) Wait until the wallet synchronizes and all the blocks are updated.

2a) Encrypt your wallet (Top left menu: Settings --> Encrypt Wallet...) Set a strong password and DON'T LOSE IT!
2b) BACKUP YOUR WALLET (Top left menu: File --> Backup Wallet...) Save the file somewhere safe.
2c) Did I mention that you need to backup your wallet? You need to backup your wallet...!
2d) HEY YOU! BACKUP YOUR WALLET!!!

3) Go to the menu 'Tools' en select option 'Debug console'.

4) In the console type getnewaddress . Your MN alias name can be a name choosen by you.
Let's choose as example "mymasternode" for this guide.

5) In the Console enter the command getaccountaddress mymasternode. You'll get the address.

6) Send 1000 GOA coins to address generated in step 4. With the 1 extra you're sure you don't have to bother about the fee.

   Goto menu 'Send' --> paste the address in 'Pay To' input box, enter 1000 en press button 'Send'.
The transaction fee should be automatically added to the transaction from the remaining balance.

7) Wait for the 10 confirmations to complete, check it in the 'Transactions tab', this can take 30-60 minutes.

7a) I hope you remembered to backup your wallet and your password... Just say'in...

8 Go to the menu 'Tools' --> 'Debug console'.

9) Type: masternode genkey

10) Type: masternode outputs

11) Copy the answers from step 9 and 10 to a empty notepad, for later usage.

15) Now go to 'Tools' --> 'Open Masternode configuration File' to edit this configuration. Delete the content of the file.
16) Add your own masternode configuration settings copy the following text, the answers did you save in step 4 and 11:

   :1947 <2nd part of answer in step 10>

   It should look something like this:
   mymasternode 88.77.66.55:1947 765765634GHGjhgfsda782332bhds98dasbgh398hds9 34783478347hHJKLh438743hhbuon4123uusdaj23JJK8327H 1

   In the above line, last number can be 0 or 1 depending on the answer of step 10, in this guide we got 1 at the end of outputs

17) Save your masternode configuration file and close notepad.

18) Close your GoaCoin Wallet program on Windows

###############################################################################################

###############################################################################################
LINUX VPS:

#go back to your VPS Linux server (putty)

#switch to the GoaCoin1 user
su - GoaCoin1

#update the vps config:
nano .goacoincore/goacoin.conf

#update your masternodeprivkey from step 9) and then exit/save
CTRL-X then Y then [ENTER]

#start it:
goacoind

# Close the SSH window to end the session

###############################################################################################
WINDOWS
#go back to windows, let's kick it off:

#Open your GoaCoin exe
#go to the "My Masternodes" tab
#hit the start or start all button.
#with any luck it will show successfully started. If it does not:
#"could not allocate vin" means your wallet isn't unlocked, OR it didn't recognize your 1000 coins for the MN, maybe wrong amount.
#check the block explorer using your MN addr (remember, it's in your receive tab so you can copy it from there)
# http://goacoin.be/
#does it have exactly one transaction of 1000? It's very picky about that rule.

#ok, hopefully all of that is sorted out
#in windows, go to the masternodes tab and click on the masternodes network sub-tab
#you should be able to find yours. The active column will take a while to update, don't worry

##############################################################################################
LINUX
#ok, let's go back to your vps (putty)

#now, let's see if we can see our ip in the list, swap in YOUR ip instead of xx.xx.xx.xx:

# change directory to the goacoin/src/ folder
cd goacoin/src/

# List all commands for ./goacoin-cli
./goacoin-cli help

# Get mining info
./goacoin-cli getmininginfo

# List Masternodes
./goacoin-cli masternode list | grep xx.xx.xx.xx

#with any luck you will see something like: xx.xx.xx.xx:1947 : 1,
#1 is good, that means your ip is active/enabled in the goacoin masternode list

#FYI: some commands you might use on occasion:
goacoind #starts goacoin
./goacoin-cli masternode list #shows all nodes
./goacoin-cli stop #stops goacoin
./goacoin-cli getmininginfo #show blocks, etc.
./goacoin-cli help #shows every possible command

#add a couple basic sec items, firewall & fail2ban
sudo ufw default allow outgoing
sudo ufw default deny incoming
sudo ufw allow ssh/tcp
sudo limit ssh/tcp
sudo ufw allow 1947/tcp
sudo ufw logging on
sudo ufw enable
sudo ufw status

#note, if you run other coins on diff ports, run the firewall allow commands to open/allow those ports as well
#like we did above to allow 1947

#fail2ban:
sudo systemctl enable fail2ban
sudo systemctl start fail2ban

#wait for rewards. First one might take up to 24 hours.
#I also use the monitoring feature of masternodes.online.
#You can create an acct and find your node by searching by ip:port
#add it to your monitor list, and be sure that it's running.

################################################################################

If you haven't done so already, I recommend you go BACKUP YOUR WALLET!!!

Has anyone ran into the issue of after the below steps, no additional directories are created? Especially the goacoincore diretory. Tried to configure the goacoin.conf but it does not exist. i followed the guide to the T and get the same results. thank you.

*Also i get this error during the ./configure switch. libdb_cxx headers missing, GoaCoin Core requires this library for wallet.

#build it, some of these steps will take a while:
cd goacoin
chmod 755 autogen.sh
./autogen.sh
./configure
chmod 755 share/genbuild.sh
make

#built, lets move back to your home dir:
cd ~/

#now, the ls command shows your files/directories
ls
#the ls -alrt will show all your hidden files/directories as well:
ls -alrt

#you should see a lot more there, like the .goacoincore directory that you didn't see before, so you have a GoaCoin & a .goacoincore directory
#copy your goacoind executable file to /usr/local/bin so that it's globally executable from anywhere
sudo chmod +x goacoin/src/goacoindt

I get the exact same error and I am not sure what cause it. Any help on this would be appreciated - I guess some people might now about it as there are over 110 MN operating.