Quote from: BkkCoins on July 26, 2013, 01:44:32 AM

Quote from: terrahash on July 25, 2013, 10:55:04 PM

Quote from: terrahash on July 25, 2013, 09:08:28 PM

Quote from: BkkCoins on July 24, 2013, 07:39:55 PM

Having a look at the 74AUP2G02 data sheet it looks like the SOT996-2 package is very close to the VSSOP8 (SOT765-1) package. For DIY I think you could easily use that part on the same footprint. It's a QFN style pkg, no leads.

Be careful though as there is a variety of similar packages.
This one is the 74AUP2G02GD which Digikey has 2860 in stock, min. 1pc.

I looked at the datasheet in detail, and turns out that 74AUP2G02GD can be used for SMT assembly as well, without modifying the board in any way.

The following is basically the same thing, except for the operating temperature rate (40 to 85 Celsius, as compared to 40 to 125 Celsius). I have no idea how it will behave if the temp rises 85 C.
http://www.digikey.com/product-detail/en/74AUP2G02DC,125/568-9186-2-ND/1300786

It shouldn't get that hot, and you wouldn't want to let it as if it gets there, then for sure the ASICs are well beyond, and they are rated for 85C as well. So any 125C parts are simply for enhanced durability / longer life.

Wow, people are fast. There were like 1600 of them, and they are all taken too.

BkkCoins, can you look for the Murata Power Inductor alternative? How about this one: http://www.digikey.com/product-detail/en/SPM10040T-R36M170/445-3603-6-ND/1856770

Or if we have to look for an alternate, what is most important? Inductance, Current Rating, DC Resistance or Frequency?