Quote from: rogerbminer on January 16, 2018, 12:12:20 AM

Quote from: jakerss on January 15, 2018, 06:49:57 PM

Quote from: Elminite on January 06, 2018, 04:15:48 AM

Quote from: Elminite on January 06, 2018, 02:03:07 AM

Quote from: oup59 on December 23, 2017, 02:35:13 PM

Quote from: Elminite on December 23, 2017, 04:19:17 AM

Quote from: oup59 on December 22, 2017, 11:39:01 AM

Quote from: Branko on September 26, 2017, 07:13:57 PM

Quote from: se32786 on September 26, 2017, 06:25:50 PM

whats the best you can do to a xfx 560 micron single fan?

About 14.8 if card doesn't have additional power connector, 15.5 if it has it.
Everything above 15.5 is just question of cooling memory...gigabyte has advantage that
metal part of cooler covers memory chips too...I don't know about any other card like that, but
if it exists, it should be able to reach 16MH/s too

Which settings should give me that speed on XFX 560 Single Fan with

Memory timings?Clocks?

Thanks.

i have a modded bios for XFX RX 560's that get me a 14.xx stable. You may be able to hit 15.xxx but I could not as the MAX mem clock was 2000 for mine. All of the ones I have are MICRON memory. However even after taking each and tuning them one by one separately. I get weird hashrates i.e 14.xxx on one while another 11.xxx on others. Its strange... not sure what is happening. I normally used the batch file on Claymore to edit the settings/set overclocks/voltage etc. But have been experimenting with using Wattman, and Afterburner.

So far Wattman is okay, but still not even hashrates all around, and AB combined with Claymore is a hit or miss sometimes to have them all at 14.xxx ;

Example: in claymore GPU0 is 11.xxx Mh/s GPU1 is 14.xxx and GPU2 is 11.xxx doesnt make any sense why this is. What I have noticed however is that the DAG file creation time for GPU1 is 8XXX ms vs 11982 ms for the other two. I'm lead to believe the faster the creation of the DAG poch file = high hash rate.

and these mod values ans straps are:
If you care to share.

I got 12.6-12.7 Mh/s with 1625 straps and 2040 mem and 1150 GPU core clock. Me,ory is micron. Single Fan XFX RX 560.

I also noticed the gpu I have is a downgraded version with 14 CU rather than original 16 CU RX560.

Maybe my values are limit with what I got.

Here is it boys

https://drive.google.com/drive/folders/1DTCpIzPC38v5ShgBu-bFzfciaQXZBxaP?usp=sharing

For u XFX 560 bois

Don't thank me tho, thank the all mighty Branko (I am not worthy), *cough* send him eth for his work *cough*

I apologize for not replying sooner, got diagnosed with severe anxiety and depression but I found the help I need and have faith everything will be ok

I will try your bios strap settings on my on other cards I'm having problems with. I'm thinking of reverting to the blockchain drivers (beta ones released in Aug) instead of the up to the date Adrenaline (now) drivers.

Also thanks for advising me on the 1625 straps.

All run now @ 14.xxx 14.3 mh/s 14.1 mh/s no problem.

Updating to 10.3 claymore vs 10.0 seemed to do it. I didn't change to Blockchain drivers as I said I would, I like Adrenalines Wattman profiles anyhow.

I'm tempted to kick the mem clock to 2075 (to reach 15.0 mh/s); its at 2000 rn but its probably not worth the risk.

You are having a 14+ mh/s with XFX rx 560 single fan model? I am thinking to buy 8x XFX rx560 but i was afraid to not to get more than 12 mh/s.

Also anyone tried dual mining with this card?

Getting Between 10.2 and 10.7 mh/s in eth and 270 - 320 in sia.
Mining Eth only 13 mh/s

Total per day average is less while dual mining.

Thank you sir for sharing results, looks like eth mining is the best way to start.

Also thanks Branko for your suggestions.