Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
astrosmurf
on 17/01/2018, 16:23:09 UTC
Quote from: astrosmurf on January 17, 2018, 01:16:02 PM
Quote from: astrosmurf on January 17, 2018, 11:20:11 AM
Quote from: Rcalin on January 17, 2018, 07:42:09 AM
Quote from: astrosmurf on January 17, 2018, 07:31:47 AM
Quote from: Rcalin on January 16, 2018, 08:20:51 PM
Quote from: kommando98 on January 16, 2018, 08:05:16 PM
I am having some issues messing with the OC settings on my smOS 8x1060 rig.  It seems when I try to change the clock or memory settings either with a single setting for all cards or individually, that it doesn't update as its not reflected in the Core/Mem column after I do it.  The only way I can modify the output of the cards is to increase the power to the cards.  Currently I'm running at 100W to each card just to get up to 2300sol/s for Equihash.  I'd like to be able to OC each card's settings accordingly on a lower power setting if possible, or leave the power setting as is and increase the output with the OC.
 ...

I saw someone say if the OC tab isn't working that you might need to delete then re-install rig.  This makes me a little nervous, do I just delete it from the dashboard and it will automatically pop back up in the dashboard again when I restart it?

Yes, that is exactly what will happen! If you have no other option, then go ahead and do it. I assure you, the rig will appear again on your dashboard, like it did first time, with noname attached to it.

I also assure you I had the OC thing happen to me too, like 1.5 months ago, and I fixed it like this, after I tried many other stuff, troubleshooting for like 4 hours.

I have the same issue, and tried to delete the rig as per Radu's advice, and it popped back up as a noname rig afterwards, but it didn't fix the OC issue. No matter what I do it seems the Core/Mem and temperature are stuck. Anyone have any other suggestions - please?

Are you OC'ing both core and mem in the same time? OC does not work unless you have some numbers in each column...

Thanks - yes, I've seen that mentioned several places and it has not been lost on me, both core and mem populated :-) Still no percieveable changes wether I OC or not, it seems like the OC settings somehow don't register at all...?

Ok, so now I tried to switch Rig Groups for the miner as well as try to edit the OC settings, and THAT didn't stick either. So no matter what I do the settings don't register with the mining rig.  I've already deleted the rig once and that didn't make any difference. Any suggestions please...?

edit: I should add that the correct group is reflected in the web interface, but the rig is clearly running the previous mining pool etc. when viewing the console.

Am I the only one having/had issues with settings not taking effect through the web interface? No matter what I try to do the mining rig is stuck at the same group settings (even though I change group to other pool etc. in other group settings that worked previously) and OC changes make no difference and deleting the rig and restarting so it reappears as noname doesn't improve anything.

Pretty much useless at this point except for the fact that it is still mining at an old pool, but delivering far from optimal revenue ATM so I want to change it, also teps are too high so I want to change OC/temp settings but they take no effect. Help, anyone?