Quote from: vapourminer on January 17, 2018, 11:55:14 PM

Quote from: R0mi on January 17, 2018, 11:28:49 PM

Quote from: philipma1957 on January 17, 2018, 10:20:11 PM

okay I am building a rig for a guy using the b250 version 1 onda.

he wants windows. and I loaded windows 10 did the up date loaded nvidia drivers booted and I am at black screen.

pissed to say the least. any guess at what to do next.

I tried a few tricks but going nowhere fast here.

Hi Phil, I put windows on the Onda B250 you sent me this past Sunday. I played around a lot changing bios settings, got a black and then a grey screen. I was connected to an Nvidia card, not to the internal GPU. I was also connected to the network. I ended up hitting the clear CMOS button by the 2 USB ports. That at least got me to the screen where I could enter the bios settings again. This time I think I only changed PCIe speeds from max to Gen1. Rebooted, loaded windows from a USB stick, install went fine. I'll check over the weekend, but I am pretty sure I did not enable the 4G option, which you have to do on Asus Z270 boards. Can check all the other settings as well and I will report back.

But bottom line, same exact board and Windows is running fine. For memory I used the G.Skills stick that either you or someone else on here posted the link to NewEgg.

phil, here are some shots of my onda b250 d8p v1 bios, its running win10pro

display is running off the igpu (the boards HDMI plug), cards have nothing plugged into them.

https://i.imgur.com/7J3nPzi.jpg?2

https://i.imgur.com/icq2Wua.jpg?1

https://i.imgur.com/Nz5Fssv.jpg?1

let me know if you need something specific you want shots of

I got it to work thanks