Quote from: R0land on January 19, 2018, 12:11:06 AM

Quote from: Cyric78 on January 18, 2018, 10:52:42 PM

Quote from: R0land on January 18, 2018, 09:48:27 PM

Quote from: Cyric78 on January 18, 2018, 09:24:50 PM

Quote from: R0land on January 18, 2018, 07:17:01 PM

Quote from: Cyric78 on January 18, 2018, 06:26:40 PM

Quote from: R0land on January 18, 2018, 12:34:22 AM

Quote from: Cyric78 on January 17, 2018, 07:02:10 PM

Hey guys.. I picked up a couple Asus Radeon RX 560 4gb Evo Oc edition cards, and am getting about 13Mh/s each just with wattman..

My question is, when I try to mod the bios, the memory only goes to 1500, and apparently there is on 14cus..

Is there anything I can do to get the memory past 2000, or should I just smile with what I've gotten?

If you upload your VBIOS, I can try to unlock the 16 CU´s.

Here is my original bios..

https://drive.google.com/open?id=1FYrVYZh47zfT3MVqlPcot4RlTBDJxWZc

I appreciate it man!

Any ideas on ways to get the mem above 1500? Flashing a bios from a similar card by chance?

Here is the modded BIOS:
http://www46.zippyshare.com/v/U8tUsqXA/file.html
Please report the result.

Good luck Wink

Well, it looks like Windows doesn't like it.. Its not seen in claymore, i've got billions of memory errors, and negative core power according to HWinfo64.. lol

Don't know what went wrong, but I'll reflash the stock one and keep chugging along!

Thanks again man!

I also modded your memory strap before Grin

. That´s the reason why claymore gets crazy ... maybe.
Do you saw the 1024 shaders in GPU-Z or HWInfo ?

This version only has unlocked shaders...maybe it works.
http://www33.zippyshare.com/v/VgaoRzk9/file.html

Good luck Wink

I'll give that one a shot.. I couldn't get the card to recognize as a 560, just a generic display, so something wasn't happy, but I'll try this one also and let you know

I hope you use the newest AMD/ATI Pixel Clock Patcher to run the modded BIOS:
https://www.monitortests.com/atikmdag-patcher-1.4.6.zip

I did.. but I may not have been giving windows enough time to load the drivers properly.. lol I've been getting very impatient with this rig..As it turns out, building a mining rig from mostly scrap parts, and making it run as fast and as stable as possible is quite a bit more difficult than building most anything else out of scrap parts... hahahaha

I'll give the bios a try again later, now that I've gotten 4 570's running at 28.5, and these 560's running at 11.5 stable for almost 24 hrs.. lets see if I can mess it up later.. hahaha