Quote from: sephtin on August 02, 2013, 04:59:48 AM

Device Name: AITech USB 3.0
Ports Total: 10
Ports Usable: 8
Power from AC: 12v @ 4A
Price USD: 60.99(Black)
Price / Usable Port: 7.62
Sold at: http://www.amazon.com/Aitech-Adapter-backward-Compatible-aluminum/dp/B009NESU4M

Bought one of these to try, and it works fine with 8+arctic fan (Stable for more than 48hours).
I tried it with 9, and it ran for a while, but ever so often, I'd come back and the light would be on for one of the BErupters. Occassionally, while stopping and starting mining software, the light would just flicker with 9. So, I don't recommend 9 as it's unstable.

I almost wish there was a column in the table for RPi compatibillity. I'm looking for a good 7 or 10 port hub for Raspbian or MiningPeon (Have both on separate cards, but no compatible hubs!) :S

When I find RaspberryPi compatible hubs, I'll likely be looking to part with this, and a couple of the 9port Anker's.

This is the USB hub that I'm currently using also. I have 5 hubs with 9 BE's and 1 arctic fan in each. I've been running it for about a month continuously and have not had any issues at all. These are all plugged into a 2.0 usb hub which is then plugged into a cheap laptop running bfgminer. Don't know if it makes a difference, but they are all plugged into a cheap UPS for power that automatically boosts voltage if it goes low. The voltage tends go below normal range in my house when the air conditioner turns on.

I probably wont be buying any more of these though, because I'm looking to transition to a Raspberry PI compatible setup also.