Quote from: norcaldrifter on January 22, 2018, 11:12:06 PM

Quote from: allinvain on January 22, 2018, 02:11:35 PM

Quote from: norcaldrifter on January 22, 2018, 02:07:47 PM

Has anyone gotten these errors before?

ERROR QUERYING DISPLAYS ON GPU0

ERROR QUERYING CONNECTED DISPLAYS ON GPU 0

ERROR RESOLVING TARGET SPECIFICATION 'GPU0' (NO TARGETS MATCH TARGET SPECIFICATION).

NONE of the OC settings work for my NVIDIA cards (that work fine with awsome miner and afterburner). The rig mines but the cards overheat and there is no overclock. Settings are 50 core 50 mem 75 target temp 75% min fan speed. In windows this card takes a 150 core 500 mem 80%TDP (1080ti) so i don't think it is clocked too high in smos. I also tried 0core 0 mem 215W 75 100% fans and still nothing. The fans dont even go above 30% speed.

It doesn't sound like it's initializing the cards properly. Do you get console output at all? Did you check the obvious stuff like your risers and perhaps trying to reburn the SMOS image your usb stick (if using it). I do hope you grabbed the correct SMOS image too lool.

Yes I get console output. It also mines just at stock settings. I'm running 1 1080ti on a 100W PSU. The card came from a working rig. I have tried a few different risers. I used HDD raw copy and SMOS NV, the miner shows on simplemining.net

I'm having this problem too, haven't been able to track down the cause. Have tested with 6 1060 cards and two 1070 cards in various combinations and various risers, including different versions and brands, also been doing the "riser dance" and moved the risers around...everything seemingly works like they should, except I can't change any temp or OC settings. I'm also getting console output and everything appears in the web interface, but I can't change OC settings or change the rig group. Or rather, I can change them, but the console reports everything to be like before the change, so the changes obviously don't register with the rig.