Quote from: MinerVGA on January 24, 2018, 06:50:55 PM

Quote from: SyntacticLuster on January 24, 2018, 06:42:03 PM

Quote from: oserega1974 on January 17, 2018, 05:06:04 AM

why on this coin I get problems, I have 6 1080 ti video cards, the total has 400 Mh / s, but on any pool I get a maximum of 150 Mh / s
sometimes even 59.2 Mh / s
what is the problem. other coins do not have problems, even on this algorithm I do not have problems with another coin, but this coin is of low speed but it should not be so.

https://b.radikal.ru/b20/1801/de/c22888e84c80.png

Your problem is most likely your difficulty setting. A difficulty of 64 is appropriate for a SINGLE 1080 or 1080Ti. You are using FAR too low a difficulty. You should either remove the difficulty setting from your script, and let it auto-adjust, or set it to something more appropriate. I would suggest that a difficulty of around 256-384 should be a good start running 6x 1080Ti's...

Thanks for listening! :-)

I have one 1080 (not ti) and I get about 51-53 Mh/s with Lyra2v2 so I don't think 59.2 is far off for a Ti version. My difficulty is auto set and it seems that pools just have it set low so I wouldn't worry about it. The coin difficulty over all is quite low as well atm so finding blocks is easy.

He is not running one 1080Ti, he is running SIX of them. He should not be getting 58Mh/s, and yes, he should be worried. It's clearly not working correctly. Your difficulty is auto set because you are using one mid-range card in a very modest rig. He is not, so the settings are quite a bit more important to achieve proper optimization. If you are putting that sort of hashpower to a pool and leave it set at auto difficulty, you are doing yourself no favors...

OP, you NEED to adjust your difficulty UP. If you run it at d=64, you are going to be losing work and wasting power...

DO NOT listen to the guy who runs one single 1080 and tells you to leave it at auto. That is less than stellar advice, and you will always get more accepted work and hashrate at a properly configured manual difficulty.