Quote from: LuKePicci on January 23, 2018, 12:48:04 PM

Finally, my first half rig is up and running, pretty easy to setup after all Grin

There are only two aspect I still can't get satisfied about one or two things.
First the cpu fan is quite noise compared to the other twelve fans of the gpus, anyone has some tips on ot? (no cpu mining, g4400, asrock h110 pro btc+).

[...]

I found a perfect trade-off by setting the cpu fan in "Silent mode" in HW monitoring settings of the motherboard firmware, it was really useless to run the fan at so high speed for being almost idle.

Quote from: LuKePicci on January 25, 2018, 02:47:02 PM

I tried setting up telegram alerts to be sent to more people, but since it seems support for multiple chatids is lacking I created a group, but I can't get messages. I used the chatid of the group. Somebody had success into something similar? Is there any supported wau to get alerts to multiple people?

It works now, I missed to include the minus char in front of the group chat id, which is a positive integer number bigger than 2^32 so it is represented as negative when parsed as signed float.

Quote from: thaelin on January 26, 2018, 10:16:16 AM

Just no way that you can be running 6 GTX1070's from one 850W PS. I cant even run 6 1060's on one with out utilization errors. Had to take one out. Need a bigger PS there on the main. Go for the 75% load rule and it will run cool and solid.

I'm running 6x1070 from one 850w psu with no kind of issue, each one power limited to 100W, 670w at power socket (78% load) while mining ethash at 180Mh/s (vcore -100 vram 960), 640w while mining equihash at 2520 Sol/s (vcore +120, vram +0). Every cable seems quite cold so far.