Quote from: flound1129 on August 08, 2013, 07:00:13 PM

Quote from: kslavik on August 08, 2013, 06:41:17 PM

Quote from: Bitmong on August 08, 2013, 05:58:08 PM

I just started mining on the pool1.eu.multipool.us (I am in Finland), and my hashrate shown on the website is 50-70% of the hashrate CGMiner shows me.

I also get lots of rejects:

GPU 0: 81.0C 3383RPM | 386.7K/378.3Kh/s | A:114 R:89 HW: 6 U:2.55/m I:18
GPU 1: 73.0C 3624RPM | 319.6K/303.1Kh/s | A: 79 R:63 HW:32 U:1.77/m I:18

Rejects show this message:

[2013-08-08 20:57:43] Rejected a615ddd1 Diff 9.86K/64 GPU 0 pool 0 (DBInterface instance has no

Is that some error on the pool software? Unfortunately I cannot see the complete error message from my CGMiner output.

- Bitmong

Look at your hardware errors - compare # of submitted shares to the # of shares shown inside the pool stats - they will much, but you must fix your HW errors before you can expect your hash rate to match to your hashrate at the pool's stats.

Edit: what GPUs are you using, please consider increasing thread-concurrency to a higher #

At intensity 18 you are going to get hardware errors pretty much no matter what, I suggest max of 13 for scrypt mining.

81.0 C is very high IMO. So are your RPM's and especially your HW errors. I use 4 x 7950 and on every pool I'm set at 18,18,18,18 intensity. I can easily go to 19 or 20 but this starts causing the rejects to increase. Besides, I figure the less strain the better. I have my max. temp set at 70C in CGMiner. My TC is 22,400. All cards are always around 68C and RPM's 1800 to absolute max 3000 without air condiitioning. When air condtioning is on its 1800 to 2400 RPM. I never see even 1 HW error. IMO you are going to burn out your cards quickly unless you get the cooling down. Do you have a big fan ?

EDIT: I have 8GB Ram and 6 core processor.