Quote from: SIN3R6Y on January 26, 2018, 05:34:10 AM

Quote from: Boneyg001 on January 26, 2018, 02:06:27 AM

Quote from: eth_mining on January 26, 2018, 01:46:27 AM

Just received the miner. It is freaking loud at my apartment. I am pretty sure someone is going to complain. I tried setting the fan speed to 70% but chip temperature is going beyond 90 C. What is the ideal fan speed and temperature guys? PCB is around 70 and chip around 100.. Is that too much?

PCB can never go to 80 or it will break...

Try to keep it at 60-70 for best results.

I recommend opening your window and pointing the outtake fan towards it. Also, You can only lower the fan if you are going to lower the frequency as well otherwise it will overheat.

I recommend getting earplugs to sleep because it will be hard but would be best for right now. Either that or call a friend and ask them to run it in a spare room for the next 1 week while you buy fan shrouds, cooler, and insulated flexible duct to make a box to silent it a little.

Let this be a PSA to everyone check your temps. If the chips are over 80C you need to ramp up the fans. With 75F/24C ambient temps, mine would hit 75C with 100% fans! I moved the miner into my garage with 32F/0C ambient temps and the chips are still running 65C... If you are hitting 80C or higher you are risking a dead board during the time this thing is most (or possibly at all) profitable.

PCB temps or chip ?

my default PCB temps are like 61-62 but my chip temps are 75-84

if i raise frequency to 625 pcb stays at 68 but chips are at 90s 80s