Quote from: Rcalin on January 26, 2018, 03:03:22 PM

Quote from: XiriusZ10 on January 26, 2018, 02:32:14 PM

Quote from: tinfoilMining on January 26, 2018, 01:43:59 PM

Quote from: tinfoilMining on January 24, 2018, 02:54:38 AM

Quote from: tytanick on January 24, 2018, 12:13:49 AM

Quote from: tinfoilMining on January 24, 2018, 12:10:21 AM

So my rig stopped mining, and it seemed to have nothing to do with the server being down.

I decided to hook a monitor to my rig to see if could find out anything. And after booting the SMOS displays this message over and over "There is no screen attached matching miner".
Any ideas what this really means?

Mostly it means that system cant find any GPU or process didnt started.
IF you have one gpu then check if it is connected, meaby something unplugged ?
Or it could be problem with riser.
You can enter command: lspci
that will list your devices. Check if you will see AMD or NVIDIA there.

Thx for answer.
I tried different risers/cards, and tried running only 1 card to, with the same result.
I also booted on an Ubuntu pendrive and checked lspci command, and GPU shows up. Monitor is connected through GPU to, all works fine.

It's strange. The rig had been working fine for weeks, until I decided to reduce power limit to the same as my Win 10 rig with similar Nvidia 1070TI gpus, then it started acting strange with sudden adjustments to core clocks causing the rig to sometimes freeze(I posted about this a page or two back). It could be running perfectly fine for a few hours, then it suddenly clocked up by itself and froze.

Could it be something wrong with the SMOS config causing it to not start up properly? Perhaps I should do a fresh install on pendrive again.

edit: Re installing/flashing OS to pendrive fixed it. Woohoo.

Ok this is getting weird. Am I getting hacked or what is going on Huh

After reflashing SMOS my miner was perfectly stable for 2 days mining zCash.
But suddenly I saw it stop reporting to pool again and I check simplemining.net to see what's going on.
There it says it's mining cryptonight algo Huh

in the console, and the core clocks have been adjusted up a bit.
Changing rig group settings and overclocking settings have no effect now and rebooting(cold boot) does not help.

I'm reflashing OS to pendrive again to see if it helps again Tongue

Hey! I have the same problem since today. 1 of my rigs changes to cryptonight. I think we were hacked or something, i can't change back to equihash.

Do you guys use 2FA for login?

Yes, but I don't think that's the problem, because if someone log in to my account he would change all the rigs, not just 1 (I have 3 rigs).