Quote from: alpha-miner on January 26, 2018, 07:08:22 PM

Quote from: Marvell2 on January 26, 2018, 06:53:18 PM

Quote from: alpha-miner on January 26, 2018, 03:42:07 PM

Quote from: Marvell2 on January 26, 2018, 03:35:53 PM

Quote from: alpha-miner on January 26, 2018, 03:20:12 PM

Quote from: Marvell2 on January 26, 2018, 03:05:44 PM

Quote from: alpha-miner on January 26, 2018, 02:51:43 PM

Can anyone with an A3 tell me if they are seeing a lot of hardware errors? Is it normal? My L3+ has run for 2 weeks with only 1 HW error. The A3 is in the thousands just overnight..

yeah same here, i reduced the frequency to around 525 mhs

What hashrate are you getting with 525 mhs?

My A3 is set to "default" setting. What is the normal frequency for the A3? Also when is warranty voided if you wanted to overclock? Anyone know?

waranty is voided, speed at 525 is around 780 ghs but shows 700 at the pool

the defaul its 600 it shows on the main mining dashboard next to the temps. What are your chip and PCB temps ?

Ah yes I see frequency on main page now.

PCB Temps => 58, 58, 62
Chip Temps => 74, 84, 87

Avg Gh = 834.51 (15 min since I updated settings)

My Sia Output: https://siamining.com/addresses/05fbb51de819d9e60c3e24c239f23ad59cb022de4a1933e62844f6fc99c9e4bedc4ca686322b

what you are getting 834 with 525 freqency ? your temps are alot better than mine

834 with default setting which is 600.

oh thats the same here, I dont like chip temps over 83 so i downclocked both mine