Quote from: jessamp on January 27, 2018, 05:56:34 AM

I just about fried mine LOL.. Out of the box in a 22C room temperature was running 85c. Did some reading, sounded normal, and read that other models have overheat protection.. So I mean this one should have it too right??

Then while I was having a drink it overheated, I seen 96C on screen before I could get to it and shut it down, went into fault mode, solid red light. Would not hash, HW errors in the 15k+ within a minute. was only reading 54 ASICS on one of the hash boards.

WOW thought I really fried it... $3000 mistake FFS.. Reboot.. Nothing solid red light, power down and on, solid red light then one hash board 0 ASICS registered.

I did a factory reset using a pin in the reset hole, then after doing up the settings, and another reboot it all came back working again thank heavens.. I'm not a farmer.. just getting into ASIC (last time I used an ASIC was in 2013ish), and $3000 is a chunk of change.

So since I live in Canada and it's winter here, an open window with a box fan blowing in cold air to cool the entire room is working good. Temps are stable at 79, 69, and 83, factory clock.

Why didn't they put an overheat protection on the A3 like other models?? I have owned an A3 for 7 hours and I'm scared to leave my house now...

those are stull high temps for the top and bottom chains, id down clock to 575