Quote from: ElitePork on August 12, 2013, 08:51:36 AM

Thanks Ashitank.

Quote from: kano on August 12, 2013, 06:41:40 AM

Quote from: ElitePork on August 12, 2013, 05:18:30 AM

Additional information.

...
2) use the cgminer "java API stat" and look at the last miner (that should be last one due to hotplug)
...

"java API stats"

And it lists all the pools after the devices, so yes the last device (i.e. where [ID] != POOL* which come after the devices)

Thanks for pointing that out.

Another tip, if you want to hardcode all engines to be running (regardless it's functional or not) change __TOTAL_DIAGNOSTICS_RUN from 10 to 0. It will skip all tests on the engines. Beware of the high HW error rate.

Next thing I wanna try is to change DO_NOT_USE_ENGINE_ZERO and overclocking it to 350mhz on the frequency and see what will happen. Hopefully it won't brick Grin

Last but not least to max out the fan speed (FAN_CONTROL_BYTE_REMAIN_FULL_SPEED) if the above is successful.

fans are always @ max at the jalapeno model. engine 0 wont work Wink

using nonworking engines is also bad, you cant overclock as high due to the voltage drop.