Quote from: jebidia on January 30, 2018, 04:58:04 PM

Quote from: Lubrifiant on January 30, 2018, 04:44:08 PM

Quote from: jebidia on January 30, 2018, 02:43:17 PM

Quote from: Lubrifiant on January 30, 2018, 01:58:10 PM

Quote from: jebidia on January 30, 2018, 12:54:14 PM

Did over .008 in 24hrs (12 x 1080ti's) on phi on ahashpool... was actually better than blake2s. Going to keep it going and see what happens over the next day or 2.

you're doing mono algo on ahash ?

Yeah, I always only do 1 algo. I did quite a bit of testing with 2 x 6x1080ti rigs and found that the over a day or so the 24hr actual always beat the current and that the mono always beat all of them. I did it over a week or so and didn't keep the best notes but a close second was a 1 hr switch off a 24hr actual. I get up and check the 24hr actual and point everything at it, regardless of pool or algo. I do keep an eye on the 24hr as some pop into the top and out of it pretty quick and I don't usually go for those. Been a lot of Blake2s lately, but I've seen phi get into it a bit more lately so I thought I'd pop on it and so far it has done well...actually most I was getting on Blake2s over the last week was a bit over .006 so to see a .008 over 24hrs was nice. I'll run with it for a bit and keep an eye on the 24 hr actuals.

What have you been mining?

It's interesting, because I use ahash too, and I have 12x GTX 1080 ti on 2 rigs too Wink

I'm doing multialgo with ahash and nemosminer, I'm doing 0,0065 per day these lasts days.

I have a good overview about efficient algo with GTX 1080 ti currently

Very cool...Most of my testing was done through Nemos setup as well. .0065 is a little better than was I was doing pointed at Blake2s... My cards are EVGA SCII 85% TDP +80 core +100 mem. Doing the math out for the last 4 hours (which will vary greatly) but I'm looking at .0076 for 24hrs on pointed solely at phi on ahash right now.

You using Nemos current or 24hr BAT? And all algos? What Interval and percentage?

Yes nemosminer v2.4.1
Interval 90
5% diff for the switch
Current, not 24h.bat

Inno3d GTX 1080 ti x3, 82% power, +75 core, +300mem
MSI GTX 1080 Ti Gaming X, 84%, +150, +300

Previous versions of nemosminer had a 5 minutes interval
With 30-60 seconds it switch too often I think.