Quote from: BeToOo on January 31, 2018, 11:06:12 PM

Quote from: michelem on January 31, 2018, 02:59:14 PM

Quote from: DexxaDK on January 31, 2018, 02:30:02 PM

Quote from: BeToOo on January 30, 2018, 02:18:25 PM

Minera 0.9.0 doesn't support Gridseed anymore?
I think the problem is in the port, but I'm trying open the port of my router without success.

Mine has the same problem, anyone has den old version 0.8.1.?

I can't find it anywhere.?

Thx

Gridseed on Minera works fine. 0.8.1 or 0.9.0 hasn't any difference for Gridseed. What kind of miner software do you use? What's the problem? Did you check the miner software console?

You are only able to post comment like "it doesn't work", well, want to know something? Who cares? Not me.

michelem I use CGminer Dmaxl Zeus fork

the error is that
[2018-01-30 15:16:09] GSD1: System reseting
[2018-01-30 15:16:10] GSD1: Set GC3355 core frequency to 750 MHz
[2018-01-30 15:16:10] GridSeed GSD0 opened on usb:/dev/ttyACM0
[2018-01-30 15:16:10] GridSeed GSD1 opened on usb:/dev/ttyACM1
[2018-01-30 15:16:10] Probing for an alive pool
[2018-01-30 15:16:10] Pool 0 difficulty changed to 524288
[2018-01-30 15:16:10] Pool 1 difficulty changed to 524288
[2018-01-30 15:16:10] Pool 0 difficulty changed to 51200
[2018-01-30 15:16:10] Pool 1 difficulty changed to 2048
[2018-01-30 15:16:11] Network diff set to 8
[2018-01-30 15:16:12] Stratum from pool 0 detected new block
[2018-01-30 15:16:16] API running in IP access mode on port 4028 (15)

What should I do?

That seems to work fine, what's the problem? What's the Minera version? Did you also try the CPUminer? That should be the best choice for Gridseed.

PS Thanks @jstefanop really appreciated.