Quote from: b3ny97 on February 02, 2018, 02:36:45 PM

Quote from: greyday on February 02, 2018, 07:27:02 AM

Quote from: b3ny97 on February 02, 2018, 02:08:17 AM

I am new to this whole thing about antminer.
This is my screenshoot of my antminer A3. It is still safe that the chip temps reach up to 90 C?

Also what software can we use to monitor our A3 from outside computer ?

90 is a bit high, you may want to manually set your fan. Start at 95% and lower until you feel comfortable (also note that these machines are buggy and sometimes a simple power cycle will have it running a little cooler).

I have mine running in a cold (50-55F) basement with the fan set to 90 and the clock set to 631 and the hottest chips are running just under 80C. Which is still slightly uncomfortable for me, but since it ran stock at 84C so I'm cool with it. 90 is worrying, though, and I'd try upping your fan speed.

How to manually adjusting the fan ?

under the main miner settings tab click the 'manual fan' control box, and set the % you want it to run at. I run all my Bitmain ASICs at 100%, never have had issues.