Quote from: r2b1 on February 02, 2018, 06:11:42 PM

Quote from: jongoslondo on February 02, 2018, 02:26:25 PM

my MSI rx560 aero 4gb oc (hynix) only got 10.9 - 11 mh/s and i saw a lot of users which has type same as mine can reach 12 mh/s or more? Huh

i've tried copy 1625 to 1750 and upper then on afterburner i set cclock 1196, mclock 2100, fan 80 and limit power +60.
if set core clock more lower, hashrate went down too and when temp reach 60 celcius core went down self:-[
i used claymore v10 to mining eth on nanopool
any trick that i can use to reach 12 Mh/s or more?

I'm getting around 14.5Mh/s with exactly that card! Try this memory timings: my memory is H5GQ8H24MJ (Hynix 2)
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17

Copy them to 2000 and 2250 only (because you will overclock memory anyway you don't have to change 1750 timings).

I'm running the card at
cclock 1200
vddc 900

memclock 2150
mvdd 1050

I didn't change the power limit. But you have to if you don't undervolt the core. My ethminer parameters are "--cl-local-work 64 --cl-global-work 32768", but default settings also work well. I'm mining on linux and your results may vary tough.

If you increase power limits and overclock the core instead it's possible to get close to 15Mh/s. But I wouldn't recommend that because efficiency will decrease and pulling more than 75W from the PCIe slot could damage your board. I'm measuring a power delta of ~60W at the wall with my settings compared to the same system with the card removed.

my memory is H5GQ8H24MJ ( SK Hynix )
when i tried to copy your timings, there is no enough space so it's only be like this "......xxxx0000001B162C31C0313F1". it should be "....xxxxx0000001B162C31C0313F17" right?
i only can find "vddc" Embarrassed

where i can find "mvdd" on polaris v3.3 ?
i just started mining so sorry for too many questions and bad english