Quote from: zachj00 on February 03, 2018, 11:45:36 PM

Quote from: mdtrav on February 03, 2018, 11:17:11 PM

I just received my 2pac and I cannot get it to work correctly.

I consistently get "share above target" very few of my shares are getting accepted. Same issue on windows and linux machines.

I've tried at 100mhz and up to 200mhz. No change it the issue. I also use a powered hub, this is the only device on the hub currently.

http://puu.sh/zg3yh/59ce44f73d.png

Any help getting it to work would be appreciated. Thanks!

What I use to start it.

Quote

./cgminer -o stratum+tcp://eu1.miningpool.shop:3333 -u 5xcZLmxBTU6whZWFCRc3qxVU8svZJQQTMD -p c=PLTCR --gekko-2pac-freq 150 --verbose

Try going to your pools webite and adjusting the mining difficulty to 128. Most pools adjust difficulty automatically but I've never heard of the pool you're using.

Thanks for the reply.
I set the diff to 128 and it did not change anything. I've tried it with several pools with no luck.