Quote from: southerngentuk on August 20, 2013, 01:18:47 PM

Quote from: MineForeman.com on August 20, 2013, 04:49:01 AM

Hi Guys,

I am in the process of uploading a new 'test' image that I am going to call MinePeon-0.2.3a .

It is identical to 0.2.3 EXCEPT it includes the libraries, files and startup for both PiMiner and cgminerLCDStats. If you have either of those LCD shields (or both) they should startup at boot.

Neil

+10000 Thanks, I've been having issues and gone back to a previous sd card as i have not had time to test and resolve it (no donation on that card,but you got 7.5g for a couple of hours while i screwed about with it,).
So I will give this a go.

On another note I cut the red wire on my hub cable to sort out my power issues, but had to solder it back as all my miners stopped working. i tested it and it is the 5V + , did I miss something ? the hubs are powered it should not need it ? right ? Huh

I'm not sure what is causing your miners to not work. I have cut the red wire in many USB cables without an issue. Are you sure that the power supply is working? If you mention the model of USB hub that you have, there may be someone else out there who has had similar problems.