Quote from: aarons6 on February 06, 2018, 07:07:24 PM

Quote from: HavenZone on February 06, 2018, 06:42:04 AM

Is MPH ever going to work with the antminer A3? it would much easier to use MPH instead of having to exchange the SC myself. Every time my A3 connects to MPH it works for about 20-30 seconds and then resets. could be the diff is not high enough. how can we set the diff or can you change it?

in the UI of the A3 is there a scheduled task tab? does it run a script called cgminer-monitor? if so put a # in front of the line and hit save and see if it works.

the cgminer-monitor is running but there are no settings in the admin for it. There are next to no settings for this like most antminers. basically you can put in 3 pools and change the freq of the chips and thats it. no real admin to these without ssh into it and searching for a way to change some of the settings. They work well connected to siamining.com but thats about it. MPH doesn't work and neither does NH. Its very limited on where you can mine with these. And the Blake2b only has one coin so its also limiting there. a lot of faith in Siacoin