Quote from: Yellow_donkey on February 06, 2018, 07:53:49 PM

Quote from: dohfish on February 06, 2018, 12:31:12 PM

Quote from: Miner59 on February 06, 2018, 12:22:01 PM

Quote from: ljepic on February 06, 2018, 12:20:43 PM

Today i get this error:

http://prntscr.com/iauwgw

-eres 0 is on, phoenix 2.6 version. Virtual memory 30gb, GPU GTX 1060 3GB, driver version 390.77. I was mining for 5,6 days without problem and now this..
Same problem in phoenix 2.6b, claymore 10.6..
Anyone know how to fix this error?

Seems like support for 3GB cards are over now.. Switch to a 4/6/8GB card, there is no fix for this other than to mine an other coin.

Stop spreading this stuff, 3GB cards will work just fine.

The error is due to either OC being too high, or your virtual memory is too low, as DAG increases requirements for VMEM also goes up, raise it to 40GB and it will more than likely work if the issue is not related to your OC.

I have 12 1060 3G cards they all work just fine, I just tested again now restarting both 2.5d and 2.6 and they both run perfectly fine.

I use 64GB for virtual memory on all of my rigs.

The DAG size that kills the 3 GB cars will be sized at 2.92 GB and well larger than you DAG imaged at 2.39. Ethereum wont hit 3Gb cutoff until roughly November 2018, provided everything remains in-line. I agree with other fella, you are OCed too high or a simple reset will fix it.

If none of that does it I would DDU the drivers and go fresh.

Hey another thing on Nvidia that throws mem errors is if your drivers were just updated, may have been pushed and you not know it if you have them on Auto. On the settings next to where you enable the compute YES option. You need to select/enable the DSR function and assign it any value, I give my rigs 2.0, but really any value will work. I forgot about that tidbit, that may help fix your issue. This does something with the memory and its been disabled when I have memory issues like that. Just takes a bit for me to remember each time.