Quote from: TheCubanMiner on February 10, 2018, 01:44:23 AM

Quote from: pikachuy on February 10, 2018, 01:37:26 AM

Quote from: pikachuy on February 09, 2018, 01:40:12 PM

Quote from: ismurdegus on February 09, 2018, 10:51:10 AM

There are 3 parts inside the Bikal miner

1) OrangePi
2) Control Board
3) Hashing boards

Can you try swapping the OrangePi and Control Board and leaving the hashing boards the same between the x10 and Giant B?

@ismurdegus, have you tried this yet? See if it's just the control board determining the algo's, if it works, then maybe all you need to do is clone the control board to switch between the X10 and Giant B.

I will send you the link to the Giant B and X10 firmwares shortly.

If you want to try and see if you can run the GB setup feel free.
Obviously you do this and could risk damaging something.

If you decide to do this, limit your risk. By using your spare board and spare Orange Pi to be safe

Download the GB Image from Baikal
Flash a spare SDcard with the Giant b image
Place the GB firmware bin file in the folder /media/boot/
Inster SD Card in OrangePi
Rebuild miner and boot up

If everything we understand about the miner is true, that they are the same hardware, just with different firmwares, you would have effectively been the first known individual that has successfully transitioned the miner if all goes well.

You are over thinking it, all he needs to do is switch over the orangepi and control board and test. That will truely determine if the hashing boards are identical or not between the x10 and Giant B.