Quote from: farizfadzimi on February 13, 2018, 03:09:24 AM

Quote from: damNmad on February 13, 2018, 02:20:41 AM

Quote from: farizfadzimi on February 12, 2018, 11:08:54 PM

Quote from: papampi on February 11, 2018, 09:33:54 AM

Quote from: farizfadzimi on February 11, 2018, 08:41:48 AM

Hi there.

you and the team are such a champ!

thank you so much for this and 'll be sure to donate to you.

I keep getting this error on xorg.

Xorg problem detected.

Restoring Xorg.

Rebooting.

and its on loop.

why?

Need your kind help please.

Both your xorg.conf and its backup are corrupted, 3main tries to restore from backup but it fails too.
As soon as your rig started close gnome-terminal, then open guake with f12.

Run the suggested code and reboot see if it fix it or not.

Code:

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

You can also restore default xorg.conf and xorg.conf.back by this code:

Code:

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_by_fullzero_Community_Release/19-2.1/restore_xorg.sh
bash /home/m1/Downloads/restore_xorg.sh

You can always find the default xorg.conf Here

thanks a bunch broskis.

okay.

this is where im at.

I am newb to ubuntu/linux distro. so please forgive me.

I just edited 1bash.

Havent even gotten to 3main yet.

Im guessing thats why all these errors pops up.

00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
/home/m1/3main: line 144: nvidia-smi: command not found

LAUNCHING: IAmNotAJeep_and_Maxximus007_WATCHDOG

LAUNCHING: Maxximus007_AUTO_TEMPERATURE_CONTROL

process in screen temp; attach with: screen -r temp

/home/m1/3main: line 455: nvidia-smi: command not found

ERROR: Error querying enabled displays on GPU 0 (Missing Extension).

ERROR: Error querying connected displays on GPU 0 (Missing Extension).

ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in assignment
'[gpu:0]/GPUGraphicsClockOffset[3]=100'.

ERROR: Error querying enabled displays on GPU 0 (Missing Extension).

ERROR: Error querying connected displays on GPU 0 (Missing Extension).

Question.

Is there a manual or a step by step guidelines I could have a look?

Because Im kinda like doing things and reading and going thru the forums for answers.

lol.

Like atom. I like atom.

So i edited 1bash using atom on windows, then I mount the image using rufus to my usb (for the time being)

And I saved my 1bash (from atom -> save as -> 1bash that is in the usb)

This was a trial and error and I couldnt find any guide I could use!

lols.

anyways.

gotta get to editing 3mains that i've missed earlier from editing 1bash.

Oh, is there a way to know how many of my GPU is active?

As in, amongst 8 that I shoved in the slots, which are active and which probably needs switching slots etc etc

Is there a way to know?

I think you are in the right place and i believe that you don't need to edit 3main at all.

You need to follow the instructions provided by @papampi to get your xorg file back.

Quote from: papampi on February 11, 2018, 09:33:54 AM

Both your xorg.conf and its backup are corrupted, 3main tries to restore from backup but it fails too.

As soon as your rig started close gnome-terminal, then open guake with f12.

Run the suggested code and reboot see if it fix it or not.

Quote

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

You can also restore default xorg.conf and xorg.conf.back by this code:

Quote

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_by_fullzero_Community_Release/19-2.1/restore_xorg.sh
bash /home/m1/Downloads/restore_xorg.sh

From his words, once the rig is UP, close the purple terminal (When you see a message on the right top corner stating 'PRESS F12') and then just press F12 for Guake Terminal.

Run the following command

Quote

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

and do a restart, once the rig is UP, close the purple terminal (When you see a message on the right top corner stating 'PRESS F12') and then just press F12 for Guake Terminal.

type this command (partly answers your last question - show all the active GPU's)

Quote

nvidia-smi

It should give you a list of available GPU's like this :

Quote

If it did, then its fine. The above commands displays all the active GPU's.

There is also another option available in the 2.0 version, through which you can identify the GPU's.

Quote

~/nvOC gpuinfo

which will also lists your GPU's in this format

Quote

m1@m1-desktop:~$/home/m1/nvOC gpuinfo

ID,VENDOR,MODEL,PSTATE,TEMP,FAN,UTILIZATION,POWER,POWERLIMIT,MAXPOWER,GPUCLOCK,MEMCLOCK
--------------------------------------------------------------------------------
0, ASUS, GeForce GTX 1060 6GB, P2, 55, 30, 97, 68.12, 78.00, 140.00, 1835, 4303
1, ASUS, GeForce GTX 1060 6GB, P2, 55, 30, 87, 79.67, 78.00, 140.00, 1809, 4303
2, ASUS, GeForce GTX 1060 6GB, P2, 58, 35, 97, 77.58, 78.00, 140.00, 1822, 4303
3, ASUS, GeForce GTX 1060 6GB, P2, 57, 30, 92, 77.58, 78.00, 140.00, 1784, 4303
4, ASUS, GeForce GTX 1060 6GB, P2, 59, 30, 98, 78.11, 78.00, 140.00, 1847, 4303
5, ASUS, GeForce GTX 1060 6GB, P2, 59, 30, 94, 77.22, 78.00, 140.00, 1784, 4303
6, ASUS, GeForce GTX 1060 6GB, P2, 57, 30, 96, 60.00, 78.00, 140.00, 1809, 4303
7, ASUS, GeForce GTX 1060 6GB, P2, 53, 30, 96, 77.74, 78.00, 140.00, 1873, 4303

One more option to identify GPU's physically which gpu mapped to which number

Quote

~/nvOC gpumap

It will run the fans to 100%, that way you can identify which GPU is mapped to 0 and which GPU is mapped to 1 etc.

Hope it answers all of your questions. Good Luck.

Thank you so much for this.
But when the OS is booted up,
When the F12 for Quake Terminal pops up,
nothing happens.

But its alright.
Thank you so much.
I'll try again.

m1@m1-desktop:~$ nvidia-smi
Mon Feb 12 23:31:40 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.59 Driver Version: 384.59 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 106... Off | 00000000:01:00.0 Off | N/A |
| 0% 49C P8 5W / 120W | 121MiB / 6072MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 106... Off | 00000000:02:00.0 Off | N/A |
| 0% 43C P8 6W / 120W | 1MiB / 6072MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 106... Off | 00000000:03:00.0 Off | N/A |
| 0% 46C P8 7W / 120W | 1MiB / 6072MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 106... Off | 00000000:05:00.0 Off | N/A |
| 0% 50C P8 6W / 120W | 1MiB / 6072MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 106... Off | 00000000:06:00.0 Off | N/A |
| 0% 43C P8 6W / 120W | 1MiB / 6072MiB | 0% Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 1102 G /usr/lib/xorg/Xorg 89MiB |
| 0 1707 G compiz 30MiB |
+-----------------------------------------------------------------------------+
m1@m1-desktop:~$ export DISPLAY=:0
m1@m1-desktop:~$ screen -r miner
There is no screen to be resumed matching miner.
m1@m1-desktop:~$ bash '/home/m1/2unix'

Xorg PROBLEM DETECTED

Restoring Xorg

Rebooting in 5

- problem with Xorg still persists -

I think Imma give it another download.
Perhaps there was an error while i was downloading it.

hey damNmad & papampi,
Its possible for me to install the OS in a master SSD/HDD right?
It is very unstable unless you ssh in and edit from there.

I used filezilla to transfer the ready edited 1bash into the miner.
And before i could do anything,
the above happened.

I'll try again.