Quote from: QuirkSilver on February 14, 2018, 11:14:34 PM

Quote from: 1337toolz on February 14, 2018, 09:59:14 AM

Quote from: QuirkSilver on February 14, 2018, 07:37:56 AM

Sapphire 560d 4gb is a garbage!!!!I didn't even try unlocking the CUs again. The memory reaches 2000s barely!

Have you ever managed to unlock 1024 on the sapp 560d? I had no such a luck Sad

Btw, my sapp 560d cards work at 2025MHz and give ~13.3-13.4Mh/s ETH

https://www.techpowerup.com/vgabios/192320/sapphire-rx560-4096-170419
Funnily, they do. I will force return two of them cause seller had them advertised as 7000mhz memory (even for gaming these are sick!)
I found by a complete fortune, that the Techpowerup bios (only one) is the same device ID by sapphire and is the 16 CU variant..... All of the cards accepted it, but i think the TDP difference being big (this link is probably for the Normal Sapp pulse 16 cu, with higher TDP) my main gpu one was struggling and choppy, but yeah, all of the 4 cards worked.... i just rolled them back to the 14 cu one, cause well, 6000mhz base memory speed sucks much.)
I do 420 h/s and 14 mh/s max with them on the 14CU original bios with timing mods with PBE

Quote from: Burntime on February 13, 2018, 04:06:06 PM

Quote from: R0land on February 12, 2018, 10:56:47 AM

The Micron strap RX560 ... 15,2 eth ... 480 xmr :

777000000000000022AA1C0073626C41B0551016BA0D260B0060060004061420EA8940AA0300000 01914292EB22E3B16

or use OneClickPBE.

please upload your Bios ;-)

R0land, i really respect you man, used your Hynix MJR timings for my 580 8gb (complete rip off/downgrade compared to the lower priced aorus 4gb).
I have to say though, both your strap and that experimental xmr one do BSOD without errors within 2075-2100 mhz memory... not sure though, If those cards never give error, can i just use PBE straps and 2300++ mhz instead? whatcha think?
also your micron one, is it different than the PBE one? better you think?
I can share/ give access to any of my cards (2gbs gigabyte powered and non, also have access to 4gb non powered,strictly micron only (gigabyte too) )

Use MSIAB + hWdinfo
Push MEM on MSIAB + Mining software and check Memory Error on Hwdinfo. If you have error reduce MEM. The goal is to have ~1% of error or zero Wink