Quote from: mrrad on August 28, 2013, 10:00:37 PM

Attach ribbon cable between dragon and jalapeno, turn on dragon by plugging in the usb to square printer cable, plug in jalapeno to power supply . I only used the elf file at the Memories" stage from Kano's excellent guide at the bottom. At the memories stage u navigate to where u saved the elf file and hit program, that is after erasing the chip .... I didn't try it without hitting the erase button first....... I would run the jalapeno after the flash without the case and with the fan blowing down... hope this helps...... http://www.kano-kun.net/?p=70

thanks, used 1.25 flashed from 5g to 7g,not bad. will try ck's 1.26 to see if will work much better.