Quote from: MagicSmoker on February 18, 2018, 12:10:54 PM

Quote from: Mattthev on February 18, 2018, 08:14:50 AM

They might fix it. I'm still on 17.6.2 drivers and on these and older ones there were problem with stability and OC settings, clocks weren't successfully applied when you check it with Hwinfo and GPU-Z. Some of my customers have same problems with newer drivers too, but not sure about Adrenaline.

Thanks for the clue on what to check and you are indeed correct - GPU-Z 2.7.0 reports the stock and current clock values are the same (1295/1750, vs. 1200/1900 reported by MSI AB) so something buggy going on for sure, and you get a merit! Disabling the iGPU on the Onda mobos has led to a lot of problems with NO video showing up, and it not being recoverable without removing the CMOS backup battery.

EDIT - so the plan, I guess, is to order a DVI-D to VGA adapter (so I can continue using my KVM switch with my other Onda board that has all NVIDIA cards) and see if I can get the mobo to disable the onboard VGA *and* enable one of the PCIe GPUs for video out.

Quote from: Mattthev on February 18, 2018, 08:14:50 AM

Quote from: MagicSmoker on February 17, 2018, 04:10:11 PM

Hmm... I just switched my (3) RX 560 rig over to mining UBQ to check this out and I'm getting 38.8 MH/s total with 1200/1900 set in MSI AB. Driver version is Adrenalin 18.2.2 in Compute mode. So my speed does seem a bit low per card (12.9 MH/s) given they all have Elpida memory. Not using the iGPU is a bit of a problem with the Onda D1800 mining mobos, though.

EDIT - and dropping all 3 mem clocks to 1800 did not change hashrate as it should have...

You probably need better timing strap. Also it's better to change clocks before you start mine it sometimes doesn't react on changes.

I'm interested... but I need to sort out this iGPU mess, first.

Again, I don't use these new drivers, but on those old I need HDMI dummy plug, it's working without it for me, but I know some RX cards need it. I use it because Teamviewer resolution that is terrible without it. I'm using one of those 2 dollars HDMI to VGA convertor, it's fake not the original, but it does the job Cheesy

All my rigs have Z270 chipset.
Thanks for the Merit

I was thinking that I will have it because of my guides, but they not giving me almost none Cheesy