Quote from: s1akov on March 01, 2018, 11:33:28 PM

Quote from: jstefanop on March 01, 2018, 11:01:03 PM

Quote from: s1akov on February 28, 2018, 07:54:45 PM

I was running Moonlander 2 for a couple of weeks, from internal USB of the laptop and had stable 4.7MHz/s speed at 832 freq.
Now, I got a good quality 2A USB hub. I put the core voltage slightly up and frequency 852. For a couple of hours it gave me speed of 4.9MHz/s and then stopped. I put the voltage back to previous position but now, no matter what frequency I put I get a speed of 3.1-2.4 MHz. Anybody knows how to check if I damaged the device? E.g. is there a way to check number of alive cores?

Thanks!

Put "-D 2>log.txt" at the end of the bat command. Start it up and it will spit out the log.txt file in same directory. In there you will see startup sequence and it checks for number of active cores. Should say 64.

Thank you for reply! It finds 63 cores. So one dead core. But it used to give me stable 4.7 MH and now I can't go higher than 3.5 MH. Could there be another reason?

That can't be your problem. Both of mine say 63 cores in the log. I never checked this day one but I am running 796 clock and hashing at about 4.45 or so per stick.

jstefanop, 0-63 = 64 cores? You sure you did not mean to say 63 not 64 for the log output? Hard to believe both mine are exactly 63 cores in the log?
One I got from you on Ebay and one I got from holybitcoin.

Bob