not enough subnet mask to go from 192.168.x.x to 10.x.x.x 
Do you have a separate switch? You can manually change your PC's IP address to be 192.168.1.x just so you can connect to blade and change it's config
Yes, thx and just got pc to show 192.168.0.1 as gateway, however, I never got docs with new blade and do not know the blade IP plus if it is 192.168.1.x I am still off some with 192.168.0.x.Do you have a separate switch? You can manually change your PC's IP address to be 192.168.1.x just so you can connect to blade and change it's config
Also, good idea to change the blade and then can go back to 10.0.0.1 if needs be.
thx
ip should be 192.168.1.254 as long as your router gives that range. 1-254