Quote from: Bimmber on March 04, 2018, 03:59:57 PM

Quote from: sakasaka on March 04, 2018, 01:15:17 PM

I am getting very good result with windows claymore. 28.5 MH/S stable hash rate.
But i get only 23 mh/s with ethos.

https://prntscr.com/imnsah

How should i do the overclock?

Yes

http://ethosdistro.com/kb/#overclocking

thanks for the link, but i couldn't manage it. tried already before.

could you please put it in ethos local.conf version?

Code:

-mode 1
-dcri 5
-cvddc 900,900,900,900,900,900
-mvddc 800,800,800,800,800,800
-cclock 1100,1100,1100,1100,1100,1100
-mclock 2000,2000,2000,2000,2000,2000

I also read the pool.txt

Code:

# SAMPLE FORMAT:
# [type] [bios name] [value]
# ------------------------------------------------------
# cor 113-C6711101-100 1050
# mem 113-C6711101-100 1250
# fan 113-C6711101-100 100
# pwr 113-C6711101-100 50
# vlt 113-C6711101-100 1118
# ------------------------------------------------------
#
# SAMPLE RX 400 SERIES CONFIG
#
# If you have global configs defined for fglrx rigs, you must use individual rig configs for rigs that have RX 400 series GPUS.
#
# KNOWN GOOD WORKING GLOBAL CONFIG FOR AMDGPU
# NOTE: globalpowertune is DPM state range 0-7, set lower for lower power usage, set higher if overclocking.
# ------------------------------------------------------
# globalpowertune 5
# ------------------------------------------------------
#
# SAMPLE PER-RIG CONFIG FOR AMDGPU (for a 6-gpu rig)
# NOTE: pwr is DPM state range 0-7, set lower for lower power usage, set higher if overclocking.
# ------------------------------------------------------
# cor c94e13 1180 1180 1180 1180 1180 1180
# mem c94e13 2150 2150 2150 2150 2150 2150
# pwr c94e13 7 7 7 7 7 7