Quote from: mr_rulezzz on September 25, 2013, 02:15:44 PM

Quote from: greaterninja on September 25, 2013, 07:35:06 AM

Quote from: mr_rulezzz on September 25, 2013, 05:06:40 AM

plz make "how to" step4step frob back up to chainminer upgrade manual for noobs like me)

ChainMiner for M Board Version 2.X boards
DO not use this guide for Version 1x m-boards.
It will fry your chips. This is only meant for Version 2 of the M-board.
I apologize for grammar as I took 2 sleeping pills and I can barely feel my fingers.

1.login as pi or root

2. type "nano /run/shm/.stat.log" if you wish to see the performance of all the chips on your board before upgrading chain miner.
(optional step)
3.(backup your chainminer version) (this creates a copy of the folder)
a. sudo cp -a /opt/bitfury /usr/bitfury.backup
b. cd /opt/bitfury/
c. pwd (make sure you are in /opt/bitfury)
d. ls -al (or type dir)
e. rm -rf chainminer (this removes everything in the chainminer folder)
4. make sure you are in the /opt/bitfury directory and not in /opt/bitfury/chainminer (it should be deleted anyway
5. type "git clone https://github.com/bfsb/chainminer.git"
6. it should now start getting the chainminer git.
7. now type "cd chainminer" you should now be in the chainminer directory
8. type "make"
9. Its going to take 5-10 minutes to create the chainminer...maybe longer.
I got some warning but everything was fine after it all finished.
it will go back to a bash prompt when done.
9a. Just wait...this is the longest part of doing this change..
10. sudo reboot

very nice! thank you very much! )

Thank you! Went from 17 to 25 gh/s noncerate on a stock starter kit. MISO errors from 40s to 0.