Quote from: pyroandy on March 22, 2018, 01:49:40 PM

Quote from: scoobysportD on March 22, 2018, 12:55:23 PM

I got in the 2 additional USB voltmeters today, so the MLD's had a quick 1 minute break after 3 full days of mining at 900mhz:

With the 3 voltmeters attached, the one that says 'full"(and with long runtime on it) is the one i already had installed. The others are new.

Amps stay around 2.18-2.35 while running at 900mhz

And that's off the two end ports 5 and 10 that share one buck converter?

Yes sir! The 2 that point sidewards should share 1 converter according to the picture from the amazon site you send me:

And the one that sticks out upwards has it's own converter.

I just took another pic, on which they've had the chance to run for a while:

The one sticking upwards just had a spike on this pic, up to 2.55amp. Besides that, it runs on 2.20-2.35 amp just like the other two, which also every now and then have a quick spike in amp draw but then immediately turn back down to 2.20-2.35. It seems to happen more when they run warm/hot. (one of the fans still is not functioning properly, and it's the one that was supposed to cool the one MLD thats sticking out upwards.)

Quote from: AltScope on March 22, 2018, 01:53:17 PM

Quote from: scoobysportD on March 22, 2018, 12:55:23 PM

I got in the 2 additional USB voltmeters today, so the MLD's had a quick 1 minute break after 3 full days of mining at 900mhz:
..
With the 3 voltmeters attached, the one that says 'full"(and with long runtime on it) is the one i already had installed. The others are new.
...
Amps stay around 2.18-2.35 while running at 900mhz

I should really get one or 2 of those

managed to get 3 going at 768 but the 2 in the 36w wont go past 700 without just producing hardware errors or failing to start

I've ordered your recommended hub at ali express but chose a faster delivery option, watch me get import tax Undecided

probably order a few more of these in a few days and make better use of it

You have cranked up the voltage of the vcore to get to 768? Or have not done anything with core voltage yet?
This is the usb voltmeter i have:
https://www.checkdiedeal.nl/usb-voltmeter-capaciteit-spanningsmeter.html?gclid=EAIaIQobChMIobDzz46A2gIVh7vtCh227gc7EAQYAiABEgJfZvD_BwE
As you're dutch too, that one is shipped same day

your 36watt hub should provide enough power for 2 MLD's... Maybe try separating the MLD's a bit more, in case that hub uses dc-dc converters in a setup like the sipolar hub?