Quote from: AltScope on March 22, 2018, 03:52:31 PM

Quote from: scoobysportD on March 22, 2018, 02:23:42 PM

...
You have cranked up the voltage of the vcore to get to 768? Or have not done anything with core voltage yet?
This is the usb voltmeter i have:
https://www.checkdiedeal.nl/usb-voltmeter-capaciteit-spanningsmeter.html?gclid=EAIaIQobChMIobDzz46A2gIVh7vtCh227gc7EAQYAiABEgJfZvD_BwE
As you're dutch too, that one is shipped same day

your 36watt hub should provide enough power for 2 MLD's... Maybe try separating the MLD's a bit more, in case that hub uses dc-dc converters in a setup like the sipolar hub?

not yet I need to get a battery for my multimeter, lent it to a mate and he left it on.. typical.
I'm British Cheesy

they had them in Maplin a little while ago and as they're having a closing down sale I'll check there
I'll give that a go, I've got one in the first port and one in the fifth at the moment I'll switch 5-10 and see what happens Cool

My bad! Thought i read some where you were dutch and that coupled to the dutch mining pool....

let us know what happens when you switch the MLD vs usb ports.

Quote from: Finless on March 22, 2018, 04:41:11 PM

Quote from: scoobysportD on March 22, 2018, 02:23:42 PM

ScoobysportD, so what is your average Vcore voltage to run them that high?
I can not seem to get past 832 clock on both mine with a good PS and fans keeping the rear heat sink cool.
When I get to 852 I get too many hardware errors (30% or so). Vcore I have tried up to 8.2 but did not want to go any higher. I assume you are runing higher than that?

Thanks,
Bob

Got in a multimeter todat, will try to get some readings tomorrow! My guesstimate would be around .85-.87