Mattthev, Thanks... and a big thanks for all the work you do on this Thread and your BIOS mods, I wish i got your program PBE 2.2 last year... easy to use and dam they got my hashrate up even higher on all my RX GPUs compared to everything else i was doing before.
For everyone still tweaking BIOS, don't waste time like I did... use and pay for Matt's BIOS mods and/or his PBE 2.2 program with all the BIOS mods loaded in there, well worth it.
Question matt:
I'm using Wattman for OC and stuff, never used OverdriveTool... does it work better at locking in OC settings?
I have TWO RX570 Armor 4GB cards and when OC in Wattman the GPU clock still drops back to 950Mhz on its own, mem stays the same.. ?? changed risers, PSU is good as only 5gpus on 1200W Titanium PSU??
tks
Mattthev... i'm just checking out on your site for the BiosMod program and just wanted to know before I run your 2.2 program for my RX570 & 580 cards should I flash back the original BIOS for each card?
if so, ok.... and then i'm guessing steps would be use your 2.2 to flash all my cards (one at a time), then DDU AMD drivers? reboot and install updated AMD adrenaline drivers, DAG patcher, reboot...?
I used the One Click BIOS mod program and just finding it not giving my RX570 & 580 4GB cards much more then 24-25 MH also having issues bringing GPU watts down.
I'm hoping your program will fix my issues.
Tks
Kevin
You don't need to flash cards with stock bios. You need to use stock bios in PBE and then flash the modded.
Make sure you also OC the memory. For the best power consumption you have to undervolt core with Overdriventool or Afterburner.
https://mining-bios.eu/guides-and-miners/bios-mod-faqs/