Quote from: eabedry on October 16, 2013, 01:39:27 PM

I received 6 boards recently and 4 of them have been working fantastically.

Two aren't working so well. After some troubleshooting I figured out that I plugged in the 8-pin CPU power instead of the 6/8-pin PCIe power. Sad

Looking at pinouts, the 12v and ground pins are swapped on the two meaning I powered up two of my boards with 12v and ground lines swapped.

I'm hoping I've managed to blow a relatively simple to replace component and I get these boards working. I can't seem to find any schematics so I can try to narrow down what components are most likely to be failed.

Have any schematics been released yet for the BitBurner XX?

There is a 10A fuse according to this picture from Burnin's site:

You may luck out and be able to replace that part.