Quote from: sickpig on October 21, 2013, 01:26:11 PM

Quote from: mininganon on October 21, 2013, 01:17:42 PM

Quote from: sickpig on October 21, 2013, 12:04:20 PM

Quote from: mininganon on October 21, 2013, 11:14:22 AM

I JUST GOT 48 F'ing cores online/a dead die is ALIVE, first try with enablecores.bin on firmware .94!

I'm glad.

Quote

Was getting a 486ghs(avg) in CG now getting after a few min 516ghs(avg) WOAH!! All I did was stop CGminer by pressing q inside it, then I applied the enablecores.bin and rebooted. I'm an 8 VRM Jupiter guys DO THIS, stop waiting.

so let check if I understand this correctly.

1) u where running on 0.94 @ 486GH/s
2) you have a die on one of your ASIC slot with all 48cores disabled.
3) you stopped cgminer
4) apply enablecore.bin from web interface
5) click on the reboot link in the web interface.
6) after that you're mining @ 516GH/s

is it right ?

HAHA yes I know it's wild! To be more specific my 5 second before was 505+- 10ghs with a usually solid 486 CG average. After the enablecore.bin procedure you reiterated above I'm getting 5 second going from 510 to 550ghs and a solid 514 avg as i type no issues to report at the moment. I'm going to let this run for a while and update later. Hopefully .94 doesn't play the slow down game with me anymore as it use to after 4-6 hours of hashing. If it does I'll just fix it with a halt and a 2 min cool down every 6 hours which puts me back on a plane for hours.

Becoming less hostile to KNC by the share lol

thanks again for sharing! I'm in your precise situation. to add some other info: I wasn't able to run my miners with .92 nor .93 due to very frequent cgminer restart so I sticked with 0.91 for quite a while. I've briefly use .94 and switch to .95 as soon as it was published.

One last question: On the "once" flaky die how many cores enabled do you have now ?

The die that came back was Die "1" on my slot 4, below is a current bertmod output of it. I have 12 other cores out across the other chips for 13 total now and usually they almost all turn on after 2 hours. I still have this damn power down slide after 6 hours but it slides only to 500 ghs in the five second instead of 440ghs or less as it use to before enablecores.bin usage.

(5s):541.7G (avg):519.5Gh/s NOW!

Temperature sensor: 38.5 C

Die ID   Cores ON   Cores OFF   %
0   48   0   100
1   47   1   97.9
2   48   0   100
3   48   0   100
DC/DC ID   ON/OFF   Status   Input Voltage   Output Voltage   Output Current
0   ON   OK   11.8 V   0.744 V   35.5 A (26.4 W)
1   OFF   OFF   11.8 V   0.712 V   0 A
2   ON   OK   11.8 V   0.738 V   38.5 A (28.4 W)
3   OFF   OFF   11.8 V   0.747 V   0 A
4   ON   OK   12 V   0.745 V   38.2 A (28.5 W)
5   OFF   OFF   11.9 V   0.695 V   0 A
6   OFF   OFF   11.8 V   0.739 V   0 A
7   ON   OK   11.8 V   0.732 V   40.3 A (29.5 W)
Total DC/DC power output: 446 W