Quote from: solari on October 22, 2013, 06:32:57 AM

Quote from: Tamerz on October 22, 2013, 04:44:59 AM

Does anyone know what it means when cgminer says this at start:

Code:

Idling 2 miners

I don't have the CAN-BUS cable so just have a BitBurner X and a BitBurner XX each on separate USB cables. I'm using these cgminer settings:

Code:

--avalon-options 115200:2:10:28:450 --bitburner-voltage 1334 --avalon-temp 30 --queue 4 -G

Does that look right for my setup? I seem to be getting pretty good rates.

Maybe the settings are too fast and too cold.
I´m running my Bitburners with this:

--avalon-options 115200:32:10:35:380 --avalon-auto --queue 4 --bitburner-voltage 1285

With this settings the bitburners are running with 435 to 446 MHz, depending to the temperature. ( At the moment 445 MHz, 45°C)

They are running fine with a raspberry pi. I used this tutorial: https://bitcointalk.org/index.php?topic=233392.0

Look at burnins site: https://www.burninmining.com/news/
You can find this: The next value is the number of miners, this must be the number of boards in cluster multiplied by 2
So if you have 2 bitburners, you have to choose the number 4:

--avalon-options 115200:4:10:35:380 --avalon-auto --queue 4 --bitburner-voltage 1285